Page 1
Owner’s Manual MBP2100/F7 Blu-ray Disc / DVD Player Read your Owner’s Manual first for quick tips that make using your Magnavox product more enjoyable. If you have read assistance, you may access our online help at http://www.funai-corp.com or call 1-800-605-8610...
INTRODUCTION Safety Instructions The model and serial numbers of this unit may be found on the cabinet. Model No.: You should record and retain those numbers for future reference. Serial No.: WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
Page 3
INTRODUCTION CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like. LASER SAFETY This apparatus employs a laser.
INTRODUCTION Contents INTRODUCTION FUNCTION SETUP Safety Instructions ................2 Using the Setup Menu ..............31 Supplied Accessories ..............5 Quick..................31 Trademark Information ...............5 Custom ..................32 Features ....................6 Language................33 Symbols Used in this Manual ............6 Video ..................34 Front Panel..................7 Audio..................36 Rear Panel..................7 Parental ................
INTRODUCTION Supplied Accessories Owner’s Manual remote control × 1 audio / video cables Owner’s Manual (EN/ES) Quick Start Guide (EN) (NB950UD/NB900UD) (WPZ1020TM002 / (1VMN29573/1VMN29574) (1VMN29575) AAA (1.5V) battery × 2 WPZ102SCP002) Trademark Information “BONUSVIEW” is trademark of Blu-ray Disc Association. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
INTRODUCTION Easy and simple connection to your HDTV via HDMI Features Connect this unit to your HDTV with one single HDMI (High- Definition Multimedia Interface) cable. It is recommended to Blu-ray Disc use a High Speed HDMI Cable for better compatibility. The You can enjoy Blu-ray Disc which is capable of storing five high definition video output signal will be transferred to your times more data than a conventional DVD.
INTRODUCTION Front Panel 6* 7 OPEN/ CLOSE DISC IN STOP PLAY STANDBY-ON SD card (*) The unit can also be turned on by pressing these buttons. 8. STANDBY-ON indicator 1. Disc tray • This indicator lights up in red when the power is in •...
INTRODUCTION Remote Control 12. REPEAT button • Press to toggle between various repeat modes. 13. OPEN/CLOSE A button* • Press to open or close the disc tray. 14. POP MENU / MENU button • Press to display the pop-up menu / disc menu. 15.
Page 9
INTRODUCTION Installing the Batteries in the Remote Control Using a Remote Control Install AAA (1.5V) battery × 2 matching the polarity Remote Control Usage Guidelines: indicated inside battery compartment of the remote • Make sure that there are no obstacles between the remote control and the infrared sensor window on the control.
CONNECTIONS Connection to the TV Choose the appropriate connection, then proceed to the corresponding instruction (A, B or C) on the next page. Best (Supports up to 1080i / 1080p, 1080p24 resolution.) Your TV HDMI IN Go To High HDMI cable Video Definition Audio...
Page 11
CONNECTIONS Connect the cables by following the descriptions below. HDMI Video / Audio Connection Your TV HDMI IN HDMI cable Note • Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched.
CONNECTIONS Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information. 2-Channel Analog Audio Connection Digital Audio Connection stereo system AV receiver / amplifier audio AUDIO IN DIGITAL AUDIO INPUT...
CONNECTIONS Network Connection with LAN • You can use a disc which offers BD-Live function by connecting the unit to the Internet. (For BD-Live information, please refer to page 27.) Networking equipment (modem, etc.) Hub or broadband router LAN cable LAN cable Internet this unit...
CONNECTIONS After you have completed all the connections, you must find the correct video channel (external input channel) on your TV. Finding the Video Channel on Your TV After you have made all the necessary connections, press [STANDBY-ON ] to turn on the unit.
PLAYBACK Information on Playback Before you start playing back a disc, read the following information. Readable cards Playable files / data Playable Discs and Files SD Memory Card (8 MB - 2 GB) JPEG, picture-in-picture This unit is compatible to play back the following discs / files. SDHC Memory Card (4 GB - 8 GB) commentary, subtitles or To play back a disc / file, make sure that it meets the...
Page 16
PLAYBACK Color Systems On-Screen Display BD-video and DVD-video are recorded in different color You can check information about the current disc by systems throughout the world. The most common color pressing [DISPLAY]. system is NTSC (which is used primarily in the United To call the on-screen display menu, press [DISPLAY] States and Canada).
PLAYBACK Chapter information Track / File information <Title / Chapter information for BD> 1 / 14 0 : 00: 51 1/10 Current track (file) number / Total number of track (file) <Chapter information for DVD> Elapsed time (or remaining time) of the current track (except for JPEG files) Indication of SD Memory Card playback 3 / 5...
PLAYBACK Use [K / L] to select “SD Card”, How to Insert a Disc then press [OK]. Press [OPEN/CLOSE A] to open the Media Select disc tray. Disc SD Card Place the disc on the disc tray with its label side facing up. Use [K / L] to select a desired track, folder or file, then press [OK].
PLAYBACK Selecting the Media Mode For the playback media to be read by this unit, the correct media mode should be selected. You can switch the media mode by following the steps below. “Media Select” is available only when an SD Memory Card is inserted. In stop mode, press [SETUP].
PLAYBACK Playing Back (BD / DVD) Press [STANDBY-ON ]. Turn on the TV and select the appropriate input on the TV to which the unit is connected. Insert a disc (refer to “How to Insert a Disc” on page 18 ). Playback may start automatically.
PLAYBACK Playing Back (Audio CD / JPEG Files) Using the Title / Disc / Pop-up Menu Before you begin, make sure the correct media mode is Many of BD-video and DVD-video discs contain title menu selected. Refer to “Selecting the Media Mode” on page 19. (BD-video / DVD-video), disc menu (DVD-video) or pop-up menu (BD-video) which guides you through the available functions in the disc.
PLAYBACK It is recommended that files to be played back in this unit are recorded under the following specifications: When Kodak Picture CD is inserted in this unit, Kodak Picture CD menu <JPEG> will appear automatically on the TV • Upper limit : 2,560 x 1,900 dots (sub sampling is screen.
PLAYBACK Fast Forward / Fast Reverse Step by Step Playback efore egin During playback, press [D (forward)] In pause mode, press [F (pause)] repeatedly. repeatedly for fast forward. Every time you press [F (pause)], playback will During playback, press [E (reverse)] repeatedly advance one step at a time.
PLAYBACK Press [B (play)] to start program playback. Program Playback • The program playback will start. 0 : 01 : 05 2 / 16 You can play back the disc/card in your desired order. 0 : 26 : 24 Program Total CD_DA In stop mode, press [MODE].
PLAYBACK Random Playback Rapid Playback This function shuffles the playback order of tracks / files. This function plays back approximately at 1.3 times the normal playback while keeping the sound output. This In stop mode, press [MODE] twice. function is available only on discs recorded in the Dolby Digital format.
PLAYBACK Noise reduction (DVD-video only) PIP (BONUSVIEW) Setting Reduces the noise of the playback picture. “Off” : Shows the original picture as recorded. “1” : Executes 3D noise reduction which detects and deletes the noise by comparing each picture Some BD-video have the PIP function which enables you frames.
PLAYBACK Enjoying BD-Live Discs with Internet Search Using [H / G (skip)] You can enjoy BD-Live which enables you to use During playback, press [G (skip)] to move to interactive features when the unit is connected to the the next track / title / chapter / file. Press it Internet.
Page 28
PLAYBACK Using [the Number buttons] (Direct Search) Title search In stop mode, enter the title number you want to search using [the Number buttons]. Playback of the title will start in a few seconds. Chapter search During playback of a title, enter the chapter number you want to search using [the Number buttons].
PLAYBACK You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack Some BD and DVD may have subtitles in 1 or more Some BD and DVD contain multiple audio streams.
PLAYBACK Setting the BD Audio Mode Note • The secondary audio will not be output when the secondary video is not displayed or when “BD Audio Mode” is set to “HD Audio Output”. (For some BD, secondary audio will be output even when There are 2 options for the “BD Audio Mode”...
FUNCTION SETUP Using the Setup Menu In the setup menu you can change the setting for audio, video, language, etc. You cannot change the setting during playback. Setting items displayed in gray indicates they are not available under the conditions at the time. Quick “...
FUNCTION SETUP Custom “ Custom” menu contains all the setting items. In stop mode, press [SETUP]. Use [K / L] to select , then press [OK]. Use [K / L] to select your desired setting category, then press [OK]. : Language : Video : Audio : Parental...
FUNCTION SETUP Language Language Audio Original Subtitle Disc Menu English Player Menu English • To select the setting items and options, refer to “ Custom” on page 32. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with Setting items Options Audio...
FUNCTION SETUP Video Video TV Aspect 16:9 Wide Auto HDMI Video Resolution HDMI Deep Color Auto Component Output 480i Progressive Mode Auto Still Mode Auto • To select the setting items and options, refer to “ Custom” on page 32. •...
Page 35
FUNCTION SETUP Setting items Options Auto*: Still Mode Automatically selects the best resolution setting (“Frame” or “Field”) based on Adjusts picture resolution and quality the data characteristics of the pictures. in still mode. Field: Stabilizes the pictures, although the picture quality may become coarse due to the limited amount of data.
FUNCTION SETUP Audio Audio BD Audio Mode Mix Audio Output HDMI Audio Out HDMI Multi(Normal) Down Sampling • To select the setting items and options, refer to “ Custom” on page 32. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with Setting items Options BD Audio Mode...
FUNCTION SETUP HDMI Audio Out Setting When using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the specifications of the device to be connected. Refer to page 36. Normally, set it to “HDMI Multi(Normal)” so that the unit automatically picks and outputs the best audio format suited to your connected device.
FUNCTION SETUP Digital Out setting When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be mute and the audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting. Quick HDMI Audio Out Audio Mute Digital Out Bitstream* :...
Page 39
FUNCTION SETUP Speaker setting (Available when you have HDMI cable connected to HDMI OUT jack) This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround. To make the most of its feature, set up your speakers appropriately by referring to the following table. How to navigate through “HDMI Multi(LPCM)”: 1) Use [K / L] to select your desired menu item then press [OK].
Page 40
FUNCTION SETUP Menu Setting items Options Descriptions Channel Level Test Tone: Off* Select “Off” to deactivate “Test Tone”. Tests or sets the “Test Tone” is the test Select “Manual”, then press [OK] to manually Manual volume for each tone which can be set the volume for the desired speaker.
FUNCTION SETUP Parental Ratings control allows you to set a limit, which prevents your children from viewing inappropriate materials. Playback first will be stopped if the ratings exceed the levels you set, and it will require you to enter a password before playing back the disc.
FUNCTION SETUP Others Others Angle Icon HDMI CEC Media Select Disc Network Connection Enable(Easy) Software Update • To select the setting items and options, refer to “ Custom” on page 32. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with Setting items Options Angle Icon...
Page 43
FUNCTION SETUP Setting items Options Network Connection Enable(Custom) Proxy Setting Do Not Use* Set the proxy server. In most cases, you can Proxy connect to the Internet Address without using proxy server. Proxy Port Connection Auto* Set the connection speed. Speed In most cases, you can 10BASE Half...
FUNCTION SETUP Network Connection Enable(Easy) Network settings are set to the following settings initially. Set up the network connection settings in order to use (In most cases, you can connect to the Internet without BD-Live or network update function. making any changes to the default settings.) Connection Test - IP Address Setting Auto(DHCP)
Page 45
FUNCTION SETUP If you select “Manual”, follow the following 3-d) After you enter all correctly, press [OK]. instruction to set the IP address and DNS. • Confirmation message will appear. Select “Yes” to complete the settings. 3-a) Use [K / L] to select “IP Address”, “Subnet Mask” or “Default Gateway”, then press [OK].
Page 46
FUNCTION SETUP 3-a) Use [K / L] to select “Proxy Address”, then press Press [RETURN] to go back to the previous [OK]. Proxy address setting screen will appear. screen, or press [SETUP] to exit. Enter proxy address. • The keyboard screen will appear. Note •...
Disable Deactivate all the network connection and settings. Note Follow steps 1 to 4 in “Connection Test” on • Please visit www.magnavox.com to download the latest firmware version. page 44. Use [K / L] to select “Disable”, then press [OK].
Please access www.magnavox.com, and download the latest firmware to a blank disc by following the direction described on the site. There are 2 types of firmware files for MBP2100: E5S00UD and E5P08UD. The file name for your unit can be found on the top panel sticker.
FUNCTION SETUP Initialize Initialize the setting or SD Memory Card. In stop mode, press [SETUP]. Use [K / L] to select , then press [OK]. Use [K / L] to select a desired option, then press [OK]. “Setup”: Resets the setup menu to the default. The setting for “Parental”, “Network Connection”...
OTHERS Troubleshooting If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist. Problem Solution No power - Check if the AC cord is properly connected. - Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again. No sound or picture - Check if the connected TV is turned on.
Page 51
OTHERS Problem Solution Angle does not switch - The angle cannot be switched for BD / DVD which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes. Playback does not start when - Check the settings in “Parental” menu. the title is selected The password for rating level - Enter the default password “4737”, then your forgotten password will be cleared.
OTHERS Glossary Analog Audio Dolby Digital Plus An electrical signal that directly represents sound. Dolby Digital Plus is the next generation digital audio Compare this to digital audio which can be an electrical compression technology developed as an extension to signal, but is an indirect representation of sound.
Page 53
OTHERS PCM (Pulse Code Modulation) The most common system of encoding digital audio, found on CD and DAT. Excellent quality that requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital, DTS, and MPEG audio to PCM.
OTHERS Language Code List Language Code Language Code Language Code Language Code French [FRE] 5264 Macedonian 5957 Siswat 6565 Abkhazian 4748 Frisian 5271 Malagasy 5953 Slovak [SLO] 6557 Afar 4747 Galician 5358 Malay 5965 Slovenian 6558 Afrikaans 4752 Georgian 5747 Malayalam 5958 Somali...
OTHERS Specifications General Signal system NTSC color Power requirements 120 V AC, 60 Hz Power consumption 15 W (standby: 0.5 W) Dimensions (width x height x depth) 14.2 x 2.0 x 8.5 inches (360 x 50 x 215mm) Weight 4.19 lbs. (1.90 kg) Operating temperature 41°F (5°C) to 104°F (40°C) Operating humidity...
Turn the unit to the standby mode, unplug the damage the unit. power plug, and please contact 1-800-605-8610 or visit : www.magnavox.com/support IR signal check Cleaning the cabinet • If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in •...
CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval. To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at: FUNAI SERVICE CORPORATION Tel: 1-800-605-8610 www.magnavox.com/support 2200 Spiegel Drive Groveport, OH 43125 E5P08UD_E5S00UD 1VMN29573 Printed in China...