Maintenance 1.42; Engine; Running In Period - Hayter LT324 Operator's Manual

1.44

ENGINE

Refer to the Engine Operator's Manual for maintenance information.

RUNNING IN PERIOD

Check wheel nut torque settings:
During first 50 hours of use and in addition to routine checks. Refer -
DAILY AND BEFORE USE. Check wheel nut torques twice a day.
Front axle wheel nut torque setting - 200 Nm.
Rear axle wheel nut torque setting - 54 Nm.
RUNNING IN PERIOD - AT FIRST 50 HOURS
Change the transmission oil filter: Unscrew and remove the bottom of the
transmission oil filter housing. Withdraw the filter element and discard. Refit
a new filter element (Hayter part no. 924709) and replace the housing.
1
2
MAINTENANCE
1P953C17
ENGINE
3
1. Transmission oil filter.
2. Centre cutterhead.
3. Hydraulic tank.
1.44
924916KG251004