HP ProLiant DL320 Quickspecs page 10

QuickSpecs
Standard Features
OS Support OS Support OS Support OS Support
Rack Airflow Rack Airflow Rack Airflow Rack Airflow
Requirements Requirements Requirements Requirements
Rack Kit Rack Kit Rack Kit Rack Kit
Microsoft Windows Server 2003
Microsoft Windows Small Business Server 2003, R2
Microsoft Windows 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
NOTE: NOTE: NOTE: NOTE: Support differences will exist between the SATA and SAS configurations.
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS NOTE: NOTE: NOTE:
Support Matrix at: http://www.hp.com/go/supportos.
NOTE: NOTE: NOTE: NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant DL320, please see:
http://h18023.www1.hp.com/support/files/server/us/index.html.
NOTE: For more Linux OS support & certification information, please visit our the ProLiant & NOTE: NOTE: NOTE:
BladeSystem Server Linux matrix:
NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select NOTE: NOTE: NOTE:
your server: http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc=
us&taskId=135&prodTypeId=15351&prodCatId=241435.
Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure CAUTION: CAUTION: CAUTION:
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must
allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be
a minimum of 7 cm (2.75 inches)
CAUTION: CAUTION: CAUTION: CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD NOTE: NOTE: NOTE:
provided with the server, or to the server documentation located in the Support section at the following
URL: http://www.hp.com/servers/dl320.
The HP ProLiant DL320 quick deploy rail system provides tool-free support for racks with square or
round mounting holes (including Compaq/HP 7000*, 9000, 10000 and HP series) with an adjustment
range to fit a rack depth of 21.25" to 37.75".
DA - 12572 Worldwide — Version 32 — June 6, 2008
HP ProLiant DL320 Generation 5 (G5) HP ProLiant DL320 Generation 5 (G5) HP ProLiant DL320 Generation 5 (G5) HP ProLiant DL320 Generation 5 (G5)
http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html
Page 10