Nortel 1140E User Manual page 56

Configuring Local Menu options
56
Enter
3. Press the
Bluetooth wireless technology.
A check mark is displayed to indicate
that the feature is activated. The
message "BT Enabled" appears at the
bottom of the display.
4. Put your Bluetooth technology headset
in its pairing or search mode. The
procedure for doing this can be different
for each headset. Refer to the
documentation that accompanied your
headset, or contact the vendor.
For example, if you are using the GN
Netcom GN 6210, do the following:
a. Turn the headset off by pressing and
holding the headset
button for 3 to 4 seconds until a
"high to low" tone is heard through
the headset. The headset blue LED
turns off.
b. Press and hold the headset
telephone
8 seconds until the blue LED flashes
and then lights steadily.
key to activate
telephone
button for about