Using Hibernate Mode - HP Firebird User Manual

To put the HP Firebird into Sleep mode manually:
Press the Sleep button on the keyboard, if it is present.
Or
1 Click the Windows Vista start button on the taskbar.
2 Click the Arrow button next to the Lock button.
3 Click Sleep.
To wake from Sleep mode:
Press the Sleep button on the keyboard.
Or
Quickly press the Power button on the left side of the badge on the front of the
HP Firebird.
If the system does not work properly when you wake it from Sleep mode, restart the computer.

Using Hibernate mode

Hibernate mode is available as an advanced power setting. When the system is in Hibernate
mode, it saves to the hard disk drive everything that is in computer memory, turns off the
monitor and the hard disk drive, and then turns itself off. When you turn on the system again,
your programs, folders, and documents are restored to the screen.
To put the HP Firebird into Hibernate mode manually:
1 Click the Windows Vista start button on the taskbar.
2 Click the Arrow button next to the Lock button.
3 Click Hibernate, if it is present.
NOTE: If Hibernate is not present, you can set up the computer to go into Hibernate
mode automatically; see "Automatic Sleep, Hibernate, or Away mode."
To wake the HP Firebird from Hibernate mode, press the Power button on the left side of the
badge on the front of the system. If the system does not work properly when you wake it from
Hibernate mode, restart the computer.
14 HP Firebird Desktop Essentials (Features may vary by model)