IBM 10/100 Ethernet Mini-PCI Adapter User Manual page 18

• Computer Name–Identifies the computer on the network for other users. This
entry must be a unique name of 15 characters or fewer, containing no spaces.
• Workgroup–Identifies the group (for example, your department name) to which
your computer belongs. If you belong to a peer-to-peer network, this entry must
be the same for all the computers in your network.
• Computer Description (optional)–Displays additional details about this
computer to other users on the network. For example, you can specify that the
computer has a printer attached.
9. If the Windows 95 installation files are on your hard disk drive, click OK. In the
Copy files from entry box, type the directory (usually C:\WINDOWS\OPTIONS\CABS),
and then click OK.
10. If you do not have the Windows 95 installation files on your hard disk drive, remove
the CD you inserted in Step 1 and insert the Windows 95 installation CD or diskette
into the CD-ROM drive or the diskette drive; then click OK.
11. When you are prompted to do so, click Yes to restart the computer and complete the
installation.
12. If there is a CD in the CD-ROM drive or a diskette in the diskette drive, remove it.
13. After Windows restarts, double-click the Network icon in the Windows Control
Panel and verify that the configuration settings meet the requirements of your
network environment. Contact your system administrator for assistance.
Uninstalling the device driver for Windows 95
Sometimes previous or incomplete installations might leave problems that can affect the
operation of the network adapter. Possible problems might be indicated if:
• The 3Com 10/100 Mini-PCI Ethernet Adapter is not working.
• Windows 95 does not detect the 3Com 10/100 Mini-PCI Ethernet Adapter.
If the device driver installation is unsuccessful for any reason, try removing the software
and repeating the device driver installation procedures. If you followed the installation
steps in the "Installing the device driver for Windows 95" section, the existing device
driver was uninstalled prior to the installation. However, you can also use the following
steps to uninstall a device driver:
1. Click Start
2. Double-click the Network icon.
3. Select the 3Com 10/100 Mini PCI Ethernet Adapter, and then click Remove.
4. Click OK; then restart the computer and reinstall the device driver using instructions
given in "Installing the device driver for Windows 95" on page 2-9.
Updating the device driver for Windows 95
You might need to update your device driver for Windows 95 if another version of the
network device driver is made available. To update the device driver for Windows 95:
1. Click Start
2. Double-click the Network icon.
3. Click the Device Manager tab. A list of devices displays, arranged by type.
4. Double-click Network Adapters.
2-10
IBM 10/100 Ethernet Mini-PCI Adapter with 56K Modem by 3Com User's Guide
Settings Control Panel.
Settings Control Panel.