IBM 10/100 Ethernet Mini-PCI Adapter User Manual page 13

• Network Link Selection. You can use this setting to select the speed (10BASE-T or
100BASE-TX) and duplex settings (half-duplex or full-duplex) for your link. Auto
Negotiation, the default, enables your notebook computer to sense and set the current
connection speed.
• Wake on Link. The default for this setting is On. If this setting is enabled, your site
can initiate a remote wake-up upon connecting to the network.
• Wake on Magic. The default for this setting is On. If this setting is enabled, your site
can initiate a remote wake-up when it receives a magic packet.
• Wake on Pattern. The default for this setting is On. If this setting is enabled, your
site can initiate a remote wake-up when it receives a packet pattern.
• LAN Function. In Windows NT 4.0, you can disable the LAN to conserve battery
power. The LAN function setting options include:
— LAN Enabled (default)
— LAN Disabled (power savings)
Adjusting advanced network settings in Windows 98 or Windows 95
To use the Advanced Settings feature to adjust settings in Windows 98 or Windows 95:
1. Click Start.
2. Select Settings; then click Control Panel.
3. Double-click the Network icon.
4. Double-click 3Com 10/100 Mini PCI Ethernet Adapter. The 3Com 10/100 Mini-
PCI Ethernet Adapter window opens.
5. Click the Advanced tab so that you can adjust the Network Link or Wake on LAN
settings.
Adjusting advanced network settings in Windows NT 4.0
To use the Advanced Settings feature to adjust settings in Windows NT 4.0:
1. Click Start.
2. Select Settings; then click Control Panel.
3. Double-click the Network icon.
4. Click the Adapters tab.
5. Double-click 3Com 10/100 Mini PCI Ethernet Adapter to open the Setup window
that contains the Advanced Settings tab for Windows NT 4.0.
Adjusting advanced network settings in Windows 2000
To use the Advanced Settings feature to adjust settings in Windows 2000:
1. Click Start.
2. Select Settings; then select Network and Dial-up Connections.
3. Right-click the Local Area Connection icon and click Properties.
4. Click Configure. The 3Com 10/100 Mini PCI Ethernet Adapter window opens.
5. Click the Advanced tab so that you can adjust the Network Link or Wake on LAN
settings.
2. Connecting and using the 3Com 10/100 Mini-PCI Ethernet adapter
2-5