IBM Wireless Keyboard and Mouse User Manual page 17

5. If you want to reset to the default setting for the mouse buttons and the
mouse stick, click Use Default.
Pointers
The Pointers window is where you can select a cursor icon scheme for the
mouse pointing functions. To customize the cursor icon scheme fro the mouse
pointing functions, do the following:
1. From the Scheme pull-down menu, select a cursor icon scheme.
2. If you want to change the default name of the scheme, go to the next step.
3. Click OK or Apply.
Motion
The Motion window is where you can change the pointer speed or customize
the pointer to automatically go to the default button in a window. To change
the pointer speed, do the following:
1. In the Pointer speed panel, place the cursor on the slider.
2. Drag the slider to the left to make the pointer speed slower or to the right
to make the pointer speed faster.
3. Click OK or Apply.
To customize the pointer to automatically go to the default button in a
window, do the following:
1. Place a check in the Snap mouse to the default button in dialogs check
box.
2. Click OK or Apply.
Double-Click
The Double-Click window is where you can change the double-click speed for
the mouse. To change the double-click speed for the mouse, do the following:
1. In the Double-Click Speed panel, place the cursor on the slider.
2. Drag the slider to the left to make the double-click speed slower or to the
right to make the double-click speed faster.
3. You can test the double-click speed by double-clicking the icon in the Test
Area panel.
4. Click OK or Apply.
Orientation
The Orientation window is where you can change the orientation of the mouse.
The default orientation for the scrolling mouse is vertical, with the buttons at
the top. If you want to hold the mouse in a different position, do the
following:
1. Click Set Orientation.
2. Follow the on-screen instructions.
3. Click OK or Apply.
Installation and user's guide
1-9