Labeling The Buttons - IBM Wireless Keyboard and Mouse User Manual

Note: If you enter a Web site address into the box, you can verify that it is
correct by clicking Test. You must be connected to an Internet Service
Provider or an Intranet to use the Test function.
The name of the selected program, file, or Web site appears in the label
box. You can edit the information in the label box.
6. Click Apply. The information for your selection appears in the label area
above the button.
7. To customize another button, repeat the steps above. If you have completed
customizing the buttons, click OK.
After you have customized any buttons, you can use the Rapid Access
Keyboard software to create a new button label.

Labeling the buttons

You might want to change the button label at the top of the keyboard if you
have changed the file, program, or Web site assigned to a customizable button.
When you use the Rapid Access Wireless Keyboard Customization window to
change a button assignment, the software automatically creates a new button
label.
To print the new button label, do the following:
1. Be sure paper is in the printer, and the printer is turned on.
2. Follow steps 1 and 2 in Customizing the Rapid Access Buttons on page 1-4
to open the Rapid Access Wireless Keyboard Customization window.
3. Click Print Label... to open the Rapid Access Keyboard Print Label
window.
4. Click the check box for black text on a white background or the check box
for white text on a black background.
5. Click OK.
6. Select the correct printer in the Print window and click OK.
7. When the label has been printed, review the label information; then cut the
label to the correct size.
Note: You do not need to remove the clear plastic cover at the top of the
keyboard when you replace a label.
To replace the button label at the top of the keyboard, do the following:
1. Grasp the middle of the old label near the cover indent and slide the old
label out from under the clear plastic cover.
2. Slide the new printed label under the clear plastic cover. You might need to
trim the edges of the label so that it fits under the cover.
1-6
IBM Wireless Keyboard and Mouse: User's Guide