Kenmore 122.16500010 Use & Care Manual page 9

e). Use 4 CC Round Head Screws and 4 DD Lock
Washers to attach Cart Brace, Right (J) to Cart Leg,
Front Right (G) and Cart Leg, Back Right (H). Attach
Cart Brace, Right (J) so that lat side will face cart
interior and wide lip faces down. See Fig. 5. interior and wide lip faces down See Fig 5
2. Wheel Assembly
Remove Flat Washers and Nuts from the ends of
Wheel Axle (K). Insert Wheel Axle (K) through Cart Leg,
Front Right (G) and Cart Leg, Back Right (H). Place
Wheel (L), cone side facing Leg, on each end of Axle.
Secure Wheels to Axle with previously removed
Washers and Nuts. See Fig. 6.
3. Bottom Panel Assembly
a) Use 4 FF Round Head Screws, 4 DD Lock Washers
and 4 GG Flat Washers to attach and securely tighten
the bottom of the left cart legs (B & C) to the Bottom the bottom of the left cart legs (B & C) to the Bottom
Panel (M). See Fig. 7.
b) Repeat step 3a) to attach & securely tighten Bottom
Panel (M) to Right Cart Legs (G & H)
4. Gas Tank Barrier Bar Assembly
Use 2 AA Round Head Screws and 2 BB Lock Washers
to secure Gas Tank Barrier Bar to the Left Side panel
(E) and Bottom Panel (M). See Fig. 8.
Fig. 5
DD
CC
J
G
Fig. 6 Fig 6
Fig. 7
FF
DD
GG
M
Fig. 8
9
H H
GG GG
DD
FF