Kenmore 122.16500010 Use & Care Manual page 15

13. Electronic Ignition Battery Installation
Unscrew the electronic ignition button and place the
battery (ZA) into the housing with the positive
terminal (+) facing outward. Replace the ignition
button. See Fig. 26. g
14. Install the Grease Tray and Grease Cup
Install the Grease Tray (ZB) from the rear of the grill
by sliding it onto glides beneath Grill. Center Grease
Tray beneath burners. Insert Grease Cup (ZC) into
Grease Tray. See Fig. 27. Note: When correctly
inserted, Grease Tray Funnel must not be over hole inserted Grease Tray Funnel must not be over hole
for Gas Tank in Bottom Panel
15. Installing Cooking Components
Important: Before cooking on your grill the first time,
wash cooking grids and cooking rack with warm ,
soapy water. Rinse and dry thoroughly. Season with
cooking oil regularly After cooking is completed turn cooking oil regularly. After cooking is completed, turn
grill to HIGH setting for 3 to 5 minutes to burn off
excess grease or food residue.
a). Install Heat Diffusers (ZD) above burners so that
holes in diffuser corners attach onto pegs in the back
ledge of firebox. See Fig. 28.
b). Evenly space Cooking Grids (ZE) on the ledge
above heat diffusers. See Fig.28. b h t diff S
c). Insert Warming rack (ZF) into top of grill with
raised edge to back of grill. See Fig.28.
Fi 28
Fig. 26
Fig. 27
Fig. 28
15
ZA ZA
ZD
ZC
ZB
ZF
ZE