Resetting Reports In A System With No Save File - Sharp UP-3500 Instruction Manual

4. Resetting reports in a system with no save file

In a system which has no save file and has been programmed so as to automatically lock satellites after
resetting when general resetting, hourly resetting, cashier resetting, clerk resetting (only the case of
individual clerk file system) or daily net resetting report is taken, the data in the satellites concerned is not
cleared. In this case, the satellites will be locked after resetting, and any entry will not be allowed in the
REG/MGR mode there.
Generation of the same resetting report in the locked state will print a copy symbol on the report.
The satellites can be unlocked by generating a corresponding consolidated resetting report at the master, or
by manual clearing of corresponding sales memories of the satellites.
Your dealer can program whether or not to have save files, and whether or not to lock the
NOTE
satellites. For details, consult your authorized SHARP dealer.
30