Sharp UP-3500 Instruction Manual page 27

Report type
<PERSONNEL>
ALL CLERK
*1 (Centralized) *2 (Individual)
IND. CLERK
*1 (Centralized) *2 (Individual)
ALL CASHIER
IND. CASHIER
EMPLOYEE
EMP. ADJUSTMENT
EMP. ACTIVE STATUS
EMP. OVER TIME
<OTHERS>
HOURLY
DAILY NET
LABOR COST%
GLU
*1 (Centralized) *3 (Individual)
GLU BY CLERK
*1 (Centralized) *3 (Individual)
ROOM GLU
*1 (Centralized) *3 (Individual)
ROOM GLU BY CLERK
*1 (Centralized) *3 (Individual)
BALANCE
BILL
CUSTOMER SALES
CUSTOMER SALES 1
CUSTOMER SALES 2
CUSTOMER BY AMT
CHARGE ACCOUNT
CUSTOMER
ORDERING
*1 (Centralized) *3 (Individual)
STACKED REPORT
*1: Corresponding reports can be generated at the back-up master after master declaration.
*2: Corresponding reports can be generated at the back-up master after master declaration under certain condition.
(Please consult your authorized SHARP dealer for the required condition setting.)
*3: Corresponding reports can not be generated at the back-up master.
26
Description
All clerk report
Individual clerk report
*2 All cashier report
*2 Individual cashier report
Employee report
*1
Employee time adjustment report
*1
Employee active status report
*1
Employee over time report
*1
Hourly report (by specified range)
*2 Hourly report (all)
*2 Daily net report
*2 Labor cost % report
GLU report
GLU report by clerk
ROOM GLU report
ROOM GLU report by clerk
*2 Balance report
*1 Bill report
Customer sales report
*3
Customer sales report 1
*3 (Only charge details)
Customer sales report 2
*3 (Charge amount & details)
Customer sales report by
*3 specified sales range
Customer charge account report
*3 (Customer no payment report)
Customer ordering report by
code range
Customer ordering report by date range
Stacked report 1
Stacked report 2
Operating modes
Required data/Remarks
OPXZ X1/Z1 X2/Z2
- X1,Z1 X2,Z2
X,Z X1,Z1 X2,Z2
- X1,Z1 X2,Z2 Only for the clerk + cashier system
X,Z X1,Z1 X2,Z2 Only for the clerk + cashier system
- - X2,Z2 Employee code
(Specify range by start and end codes.)
- - X2 Employee code
(Specify range by start and end codes.)
- - X2 Employee code
(Specify range by start and end codes.)
- - X2,Z2 Employee code
(Specify range by start and end codes.)
- X1 - Time range
- X1,Z1 -
- - X2,Z2
- X1 -
- X1,Z1 - GLU code
(Specify range by start and end codes.)
Only for the centralized GLU file system
- X1,Z1 - Only for the centralized GLU file system
- X1,Z1 - ROOM GLU code
(Specify range by start and end codes.)
Only for the centralized GLU file system
- X1,Z1 - Only for the centralized GLU file system
- X1 X2
- X1,Z1 -
- - X2 Customer code
(Specify range by start and end codes.)
- - Z2 Customer code
(Specify range by start and end codes.)
- - Z2 Customer code
(Specify range by start and end codes.)
- - X2 Customer sales range
- - X2
- - X2,Z2 Customer ordering code
(Specify range by start and end codes.)
- - X2,Z2 Date range
X1,Z1 X2,Z2