Cisco DPC2203C Installation And Operation Manual page 44

Chapter 3 Installing the DPC2203C for Telephone Service
Location of Battery
The following illustration shows the location of the battery on the DPC2203C.
Removing and Replacing the Battery
Follow these steps to remove and replace the battery. You can remove and replace
the battery without disconnecting the AC power source.
Carefully turn the modem over.
1
2 Gently release the latch to open the battery cover and gain access to the battery
compartment.
3 Grasp the plastic strip on the front of the battery and gently slide the battery
forward to remove it from the battery compartment.
4 Insert a new battery into the battery compartment.
Close the battery compartment door. The battery lock will automatically re-
5
engage.
Important! It can take as long as 24 hours for the battery to charge fully.
Note: Dispose of the battery in accordance with local regulations and
instructions from your service provider.
28 72-4017315-01 Rev B