Key Transpose; Mode Change-1 - Casio VZ-8M Operation Manual

8. Key Transpose

Key Transpose Data is received.
(1) Data Format'
N(HEX): Basic Channel
♦Basic channel is the MIDI channel that set in TOTAL-04.
(2) Transmit/Receive Status
(3) Transmit/Receive Operations
RECEIVE: When Key Transpose data is received from a personal computer or other device on the OP MEM,
r
(4) Data reception from VZ-1/VZ-10M

9. Mode Change-1

Altering NORMAL, COMBI, MULTI CH, OP MEM MODE.
(1) Data Format
-10-
00
FO 44 03
N = Display data - 1 (N = O ~ F (HEX))
-Dl—v
NORMAL, COMBI or MULTI CH PLAY, EDIT or TOTAL CONTROL MODES, the display
shifts to TOTAL-01 (KEY TRANSPOSE) and shows the received data.
The Key Transpose Data format of the VZ-8M is the same as that used in the VZ-1 and VZ-10M. Conse
quently, this data can be received as described above.
1 ' '
N(HEX): BASIC CHANNEL
♦Basic channel is that set in TOTAL-04.
N = Display data - 1 (N = O ~ F (HEX))
DD(HEX): Mode Change-1 Data
7N 40
->DATA: 00 - f 06 (UP)
\05 (Down)
-> POLARITY (0: +
' "" 5 0
I L_
0 Do [ 0 DL I 1 F7