Voice Parameter Menu; Performance/Editing In The Normal Mode - Casio VZ-8M Operation Manual

Performance/Editing in the Normal Modejj
d Functions,
TOTAL—01
fo select sounds for performance in the normal mode
])Press the NORMAL mode key.
Dlf you want to choose a PRESET or an INTERNAL patch, select by
i using the SHIFT key.
If you want to choose a CARD patch, first insert the RAM or ROM
card in the card slot and then select by using the SHIFT key.
Each bank holds up to 64 patches and 64 operation memories.
When using a new RAM card, you must first format it (see TOTAL-06).
A formatted RAM card is capable of storing up to 64 patches and 64
operation memories.
pSelect the patch you want to play.
I In order to change the BANK, first press the BANK key (indicator
lights). Next press the PROG NO key corresponding to the BANK "let
ter" you want to choose. (For example, the "B2" key corresponds to
the "B" bank.) Notice that the BANK key indicator goes out as soon
as you select a bank.
Finally, select the voice number by pressing a PROG NO key once again.
In this case, the keys correspond to the numbers digit. (For example,
the "B2" key would now correspond to voice number "2".)
|®Select the performance mode (Keyboard, Guitar or Wind) by pressing
the value keys.
|To write a single patch to memory
|(pSelect the patch you want to write to memory (preset, internal or card
patch or Compare/Recall ON/OFF) and select one of the performance
modes (K, G, W).
*®Hold down the WRITE key.
The LCD appears as shown at the right, and the INTERNAL/CARD
indicators go out. If you release the WRITE key, the LCD will return
to its normal status.
Ifyou've used the COMPARE/RECALL function when editing a patch
using VOICE PARAMETER menu functions, be sure that the COM
PARE/RECALL indicator is ON. If it is OFF, press the COMPARE/
RECALL key.
s^; {..
■»
□
... SHIFT
M ON/OFF ON/OFF
□
WRITE
COPY/INIT
WRITE UOICE
INT *-*
COMPARE/
RECALL
•76-