Master Tune - Casio VZ-8M Operation Manual

•VZ-8M (SAVE side) -♦ VZ-1/10M (LOAD side)
When loading to a VZ-1/10M, the VZ-8M continues to send VZ-8M format data even after the "OK" message
appears on the VZ-1 or VZ-10M. Because of this, the VZ-8M "OK" message appears slightly after that of the
connected device.
•VZ-1/10M (SAVE side) -> VZ-8M (LOAD side)
When loading from a VZ-1/10M to a VZ-8M, VZ-1 format data is initially received. If, after a specified amount
of time, VZ-8M format data is not received, the VZ-8M determines that data is from a VZ-1/10M, and an "OK"
message appears. Data parameters unique to the VZ-8M are loaded with initialized values.

7. Master Tune

Master Tune Data is received.
(1) Data Format
03
FO 44
N(HEX): Basic Channel
♦Basic channel is the MIDI channel that set in TOTAL-04.
N = Display data - 1 (N = O ~ F (HEX))
u, DL:
(2) Transmit/Receive Status
(3) Transmit/Receive Operations
RECEIVE: When Master Tune data is received from a personal computer or other device on the OP MEM,
NORMAL, COMBI or MULTI CH PLAY, EDIT or TOTAL CONTROL MODES, the display
shifts to TOTAL-00 (MASTER TUNE) and shows the received data.
(4) Data reception from VZ-1/VZ-10M
The Master tune Data format of the VZ-8M is the same as that used in the VZ-1 and VZ-10M. Consequently,
this data can be received as described above.
7N | 4 0 —| 00
00
-»DATA: 00~40(H)
{?=:
-» POLARITY
0 Dl[
F7
Q