What Are The Installer Settings - Robertshaw 9700i User Manual

110-1023E.qxd 11/18/04 10:50 AM

What are the INSTALLER settings?

The INSTALLER SETTINGS are set up during the initial installation. They tell the thermostat how to function with your heating or
cooling equipment. The following is a brief overview and discussion of these settings.
INSTALLER SETTINGS
SYSTEM SETUP
RESIDUAL COOL
AUTO CHANGEOVER
EER
HOME
SYSTEM SETUP
FURNACE
HEAT PUMP
INSTALL MENU
1ST STAGE HEATING
GAS / OIL
ELECTRIC
INSTALL MENU
Page 19
INSTALLER SETTINGS
DEADBAND
GAS
SECURITY
60
CONTACT INFO
OFF
SERVICE INT
ON
HOME
SELECT
SYSTEM SETUP
Choose the system component which the thermostat will control.
This screen appears only on models 9700i and 9701i.
SELECT
1st STAGE HEATING
The 9701i and the 9715i can have a gas/oil or electric first stage heating.
Choose the energy source for 1st stage heating.
SELECT
INSTALLER SETTINGS
3˚F CONTACT INFO
OFF SERVICE INT
REMINDER
TEMP OFFSET
MAIN MENU
SELECT
RUN
0.0°F
SELECT
19