Installer Setup Menu - Robertshaw RS8210 Installation Manual

Installer Setup Menu

This thermostat has an installer setup
menu for easy configuration. Follow the
procedure below to set up the thermostat to
match the specific heating/cooling system.
1. Press MENU.
2. Press and hold TECH SET for 3 seconds.
3.
Configure the installer options as
desired using the table below.
Use or
and NEW STEP or PREV STEP to move
from one option to another. Note: Only
press DONE when you want to exit the
Installer Setup options.
4. °F/°C Selection Setting: F(Fahrenheit) or C(Celsius).
5. 24H/12H Selection: Setting the 24 hour or 12 hour time format.
6. ELEC/GAS Selection: Select the ELEC or GAS.
to change settings
INSTALLER SETUP MENU
13