Freeze - Yamaha SPX90 Operating Manual

TRIGGERING
MANUAL Mode
To actually begin recording if the MANUAL mode
has been selected, press the PARAMETER IN-
CREMENT key. The SPX90 will record for 500
milliseconds.
Also the optional foot switch FC-5 can be used.
Connect the FC-5 to the MEMORY/TRIGGER
Foot Switch Jack and press the FOOT TRIGGER
Key. Then FC-5 works as the trigger switch when
it is pressed.
AUTO Mode
If the AUTO mode has been selected, the SPX90
will automatically begin recording when an in-
put signal of sufficient level is detected.
The LCD displays "TRIGGER!" when the freeze
function is triggered.
When the recording begins the LCD displays
" . . . . . . " .
The freeze (recording) ends automatically after
500msec and the display says "OK".
4. OVERDUB Recording
To "overdub," or record new material without eras-
ing the previously recorded material, use the follow-
ing procedure.
1. Press the PARAMETER key until the OVERDUB
display appears.
2. Press the PARAMETER DECREMENT key. This
sets the record ready status, and recording will
begin as soon as a trigger signal is received.
FREEZE operation
15
* To begin recording again, press
the parameter decrement key to enter
the Rec Ready Mode.