Early Ref; Pitch Change; Freeze - Yamaha SPX1000 Operation Manual

1. AVOID EXCESSIVE HEAT, HUMIDITY, DUST AND
VIBRATION
Keep the unit away from locations where it is likely to
be exposed to high temperatures or humidity – such
as near radiators, stoves, etc. Also avoid locations
which are subject to excessive dust accumulation or
vibration which could cause mechanical damage.
2. AVOID PHYSICAL SHOCKS
Strong physical shocks to the unit can cause damage.
Handle it with care.
3. DO NOT OPEN THE CASE OR ATTEMPT REPAIRS OR
MODIFICATIONS YOURSELF
This product contains no user-serviceable parts. Refer
all maintenance to qualified Yamaha service
personnel. Opening the case and/or tampering with the
internal circuitry will void the warranty.
4. MAKE SURE POWER IS OFF BEFORE MAKING OR
REMOVING CONNECTIONS
Always turn the power OFF prior to connecting or
disconnecting cables. This is important to prevent
damage to the unit itself as well as other connected
equipment.
5. HANDLE CABLES CAREFULLY
Always plug and unplug cables – including the AC
cord – by gripping the connector, not the cord.
2
PRECAUTIONS
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
WARNING : THIS APPARATUS MUST BE EARTHED
IMPORTANT. The wires in this mains lead are coloured in accordance with the following code:
GREEN-AND-YELLOW : EARTH
:
BLUE NEUTRAL
BROWN : LlVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured
markings identifying the terminals in your plug proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug
which is marked by the letter E or by the safety earth symbol
AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter
N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the
letter L or coloured RED.
CANADA
THIS APPARATUS COMPLIES WITH THE "CLASS B" LIMITS FOR RADIO NOISE EMIS-
SIONS SET OUT IN RADIO INTERFERENCE REGULATIONS.
CET APPAREIL EST CONFORME AUX NORMES "CLASSE B". POUR BRUITS RADIO-
ELECTRIQUES. TEL QUE SPECIFIER DANS LE REGLEMENT SUR LE BROUILLAGE
RADIOELECTRIQUE.
6. CLEAN WITH A SOFT DRY CLOTH
Never use solvents such as benzine or thinner to clean
the unit. Wipe clean with a soft, dry cloth.
7. ALWAYS USE THE CORRECT POWER SUPPLY
Make sure that the power supply voltage specified on
the rear panel matches your local AC mains supply.
8. ELECTRICAL INTERFERENCE
Since the SPX000 contains digital circuitry, it may
cause interference and noise if placed too close to TV
sets, radios or similar equipment. If such a problem
does occur, move the SPX1000 further away from the
affected equipment.
9. BACKUP BATTERY
The SPX1000 contains a long-life lithium battery which
maintains the contents of the buffer and user memory
locations even when the unit is turned OFF. With
normal use the battery should last for approximately 5
years. If the battery voltage falls below the safe level,
however, the "*** WARNING *** LOW BATTERY"
display will appear on the LCD when the power is first
turned ON. If this occurs, have the battery replaced by
a qualified Yamaha service center. Do not attempt to
replace the battery yourself!
or coloured GREEN or GREEN-