Getting Started; Inserting Batteries Into The Remote Control; Using The Remote Control; Turning On The Power - Yamaha DVD-S550 Owner's Manual

1 Open the battery compartment.
2 Insert two batteries type R06 or AA,
following the indications (+ -) inside the
compartment.
3 Close the cover.
Using the remote control
~ g~i
000
0000
0000
Handling the remote control
• Do not spill water or other liquids on
the remote control.
• Do not drop the remote control.
• Do not leave or store the remote
control in the following types of
conditions:
high humidity such as near a bath
high temperature such as near a heater
or stove
extremely low temperature
dusty places
Getting Started
Connect the AC power cord to the power
outlet.
2 Turn on the TV and your AV receiver.
3 Select the appropriate input source at the
AV receiver that was used to connect to
this unit. Refer to the equipment owner's
manual for detail.
4 Turn this unit on.
S Set the TV to the correct Video IN
channel. (eg. EXT1, EXT2, AV1, AV2,
AUDIONIDEO, etc. Refer to your TV
owner's manual for detail)
... The front display lights up and the
default screen appears on the TV.
This DVD Player is compatible with both
NTSC and PAL. Select the color system
that matches your TV.
1 Press
SETUP.
2 Press
~
repeatedly to select {VIDEO
SETUP PAGE}.
3 Press ...
T
to highlight {TV TYPE}, then
press
~.
7
1 Open the battery compartment.
2 Insert two batteries type R06 or AA,
following the indications (+ -) inside the
compartment.
3 Close the cover.
Using the remote control
~ g~i
000
0000
0000
Handling the remote control
• Do not spill water or other liquids on
the remote control.
• Do not drop the remote control.
• Do not leave or store the remote
control in the following types of
conditions:
high humidity such as near a bath
high temperature such as near a heater
or stove
extremely low temperature
dusty places
Getting Started
Connect the AC power cord to the power
outlet.
2 Turn on the TV and your AV receiver.
3 Select the appropriate input source at the
AV receiver that was used to connect to
this unit. Refer to the equipment owner's
manual for detail.
4 Turn this unit on.
S Set the TV to the correct Video IN
channel. (eg. EXT1, EXT2, AV1, AV2,
AUDIONIDEO, etc. Refer to your TV
owner's manual for detail)
... The front display lights up and the
default screen appears on the TV.
This DVD Player is compatible with both
NTSC and PAL. Select the color system
that matches your TV.
1 Press
SETUP.
2 Press
~
repeatedly to select {VIDEO
SETUP PAGE}.
3 Press ...
T
to highlight {TV TYPE}, then
press
~.
7