Yamaha DVD-S1800 Owner's Manual page 17

CONNECTIONS
• HOMI video output
This unit is compatible with the following video fonnats:
480p/60 Hz, S76p/SO Hz, nOp/50 Hz, 60 Hz, 1080i/SO Hz, 60 Hz, and 1080p/SO Hz, 60 Hz.
NO,t,!$l
• You need to select one of the HDMI resolution settings by pressing HDMI on the remote control repeatedly or by using the HDMI
Video setup menu (see page 36).
• Depending on the connected DVI component, black and white in the image may not be distinct. In this case, adjust the picture setting
of the connected DVI component.
• HOMI audio output
Audio format
Analog output'
..
'
.' . HDMIAudlo
setting
AutO*l PCM Off
Multi-channel
PCM multi*2
Dolby Digital
Stereo
Dolby Digital
PCM 2ch
Multi-channel PCM multi*2
DTS DTS
DVD-Video Stereo PCM 2ch
Multi-channel PCM multi*2
MPEG MPEG
Stereo PCM 2ch
PCM 2ch*4 Multi-channeVStereo PCM 2ch PCM 2ch
Multi-channel PCM (PPCM) multi*2,3 PCM (PPCM) multi*2,3
Multi
DVD-Audio Stereo PCM (PPCM) 2ch*3 PCM (PPCM) 2ch*3
2ch*4
Multi-channeVStereo PCM (PPCM) 2ch PCM (PPCM) 2ch
Ofr
CDIMP31
2ch Multi-channeVStereo PCM 2ch PCM 2ch
WMNDivX®
Multi-channel
PCM multi*2
Multi
DTS-CD Stereo DTS PCM 2ch
2ch Multi-channeVStereo PCM 2ch
VCD 2ch Multi-channeVStereo PCM 2ch
PCM 2ch
Multi-channel
PCM multi*2
Multi
SVCD Stereo
MPEG PCM 2ch
2ch Multi-channeVStereo PCM 2ch
SA-CD Multi/2ch Multi-channeVStereo - - -
* I: If the connected HDMI component does not support bitstream signals (Dolby Digital, DTS, and MPEG), the audio
output is automatically changed from bitstream signals to PCM signals.
*2: If the HDMI component does not support multi-channel audio signals, the audio output is automatically changed
from PCM multi-channel signals to PCM stereo signals and 48 kHz!16 bits signals or less.
*3: If the audio source is prohibited from downmixing, the front UR channel audio and 48 kHz!16-bit signals or less are
output instead of downmixed stereo.
*4: If the connected component does not support more than 48 kHz, the audio output is automatically changed to 48 kHz!
16-bit signals or less.
Notejij
• You need to set HDMI Audio (see page 37).
• SA-CD signals cannot be output using HDMI. Make an analog connection to listen to SA-CD (see page 10),
13
En