Table of Contents
Advertisement
CONNECTIONS
AV receiver
<0>
AV
receiver
VIDEO
S VIDEO
COMPONENT
OUT
OUT
VIDEO OUT
This unit (U.K., Europe, and Russia models)
This unit has SCART, composite video, S-video, and
component video output jacks. If your AV receiver has
video output jacks, connect your receiver and then your
TV so that you can use one TV for several different video
sources (LD, VCR, etc.) by simply switching the input
source selector on your receiver.
Use the one that corresponds to the input jacks on the
component to be connected.
I I
IT!TI
< A>
~
<B>
[1,~ -~
IN
IN
• Digital connections
If you want to use the Dolby Digital, DTS, or MPEG
function on your AV receiver, connect DIGITAL
(OPTICAL) <A> or DIGITAL (COAXIAL) <B> jack of
this unit to the corresponding input jacks of your AV
receiver using a commercially available digital optical or
digital coaxial cable.
1/1iliii
• If you make a connection with <A> or <8>, set [Digital Out]
to [All] (see "Setting the digital output" on page 31).
• If the audio format of the digital output does not match the
capabilities of your receiver, the receiver produces a distorted
sound or no sound at all. Make sure to select the appropriate
audio format from the menu screen on the disc.
Pressing AUDIO on the remote control once or more may
change not only the audio languages but also the audio format.
• SA-CD audio signals are not output from DIGITAL
(COAXIAL/OPTICAL) jacks.
• If you want to enjoy Dolby Digital, DTS, and MPEG formats,
you must connect this unit to an AV receiver that supports
these formats.
TV
VIDEO
IN
S VlOEO
COMPONENT
IN
VIDEO IN
11
En
Advertisement
Table of Contents
