Connecting The Cables - NetComm FIBRE NF1ADV Quick Start Manual

1
1. If you are using ADSL, connect the supplied RJ-11 cable to the DSL port on
the back of your device and to the phone port that supplies your ADSL service.
2. If you are using Fibre, connect your RJ-45 Ethernet cable from the WAN
Ethernet port to your NBN supplied termination device (ONT).
3. Connect the supplied RJ-45 Ethernet cable from one of the Ethernet Ports
on the back of the device to your computer.
4. Connect the power adapter and press the on/off button
OPTIONAL
5. Connect an RJ-11 cable from the telephone port on the back of your device to
a telephone handset to enable VOIP service usage.

Connecting the cables