Belkin Enhanced Wireless Modem Router User Manual page 78

ManUally ConfIgURIng nETWoRK sETTIngs
sections
table of contents
Manually Configuring network adapters in Windows 98 or Me
1�
Right-click on "My Network Neighborhood" and select "Properties"
from the drop-down menu�
2�
Select "TCP/IP -> settings" for your installed network adapter� You
will see the following window�
(1)
(2)
Enhanced Wireless Modem Router
1 2 3
(3)
4 5 6
3�
If "Specify and IP address" is selected, your Router will need
to be set up for a static IP connection type� Write the address
information in the table below� You will need to enter this
information into the Router�
4� Write the IP address and subnet mask from the "IP Address"
tab (3)�
5� Click the "Gateway" tab (2)� Write the gateway address down in
the chart�
6� Click the "DNS Configuration" tab (1)� Write the DNS address(es)
in the chart�
7� If not already selected, select "Obtain IP address automatically" in
the "IP Address" tab� Click "OK"�
Restart the computer� When the computer restarts, your network
adapter(s) are now configured for use with the Router�
76
7 8 9 10