Belkin G Wireless router User Manual
  1. Manuals
  2. Brands
  3. Belkin Manuals
  4. Wireless Router
  5. Wireless G Router
  6. User manual

Belkin G Wireless router User Manual

G wireless router
Hide thumbs Also See for G Wireless router:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
G Wireless
routEr
user Manual
PM01110ea-A F5D7234-4
English
Français
DEutsch
nEDErl anDs
Español
italiano

Advertisement

Table of Contents
loading

Related Manuals for Belkin G Wireless router

Summary of Contents for Belkin G Wireless router

  • Page 1 G Wireless routEr user Manual PM01110ea-A F5D7234-4 English Français DEutsch nEDErl anDs Español italiano...

  • Page 2: Table Of Contents

    Viewing the DHCP Client list Page� � � � � � � � � � � � � � � � � � � � � � � � � � � � � 45 Configuring the Wireless Network settings � � � � � � � � � � � � � � � � � � � � � � 46 g Wireless router...

  • Page 3: Benefits Of A Home Network

    Thank you for purchasing the Belkin G Wireless router (the router)� The following two short sections discuss the benefits of home networking and outline best practices for maximizing your wireless home network range and performance� Please be sure to read through this User Manual completely, and pay special attention to the section entitled “Placement of your router for Optimal...

  • Page 4: Placement Of Your Router For Optimal Performance

    To achieve the best wireless network coverage for your “wireless clients” in the same way, your wireless connection and performance will degrade (i�e�, computers enabled by Belkin Wireless Notebook Network Cards, somewhat as the distance between your router and connected devices Wireless Desktop Network Cards, and Wireless UsB Adapters): increases�...
  • Page 5 (between your computers example, change the phone to channel 1 and move your router to and router)� channel 11� see your phone’s user manual for detailed instructions� • if necessary, consider switching to a 900MHz cordless phone� g Wireless router...
  • Page 6 Many commercial websites that require a user name and password to access your account • For Belkin wireless networking products, use the detailed site secure connections can be interrupted by a computer’s power survey and wireless channel information included with your Wireless management setting, which causes it to “go to sleep�”...

  • Page 7: Product Overview

    The following is a list of features that make your new Your router employs Network Address Translation (NAT) to share the Belkin G Wireless router an ideal solution for your home or small office single iP address assigned to you by your internet service Provider while network�...
  • Page 8 Assistant software is compatible with Windows 2000, XP, Vista, and Mac Os X v10�4 and v10�5� if you are using another operating system, the Wireless router can be set up using the Alternate setup Method described in this User Manual (see page 25)� g Wireless router...

  • Page 9: Knowing Your Router

    The leD indicators are easily visible on the front of the router to provide • Belkin G Wireless router you with information about network activity and status� • Quick installation Guide Belkin setup Assistant CD with User Manual • • Belkin rJ45 ethernet Networking Cable • Power supply System Requirements •...
  • Page 10 KnoWing your routEr sections table of contents 1. Modem leD 2. Power leD 3. security leD 4. Wireless leD 5. internet leD 6. Wired leDs (1 – 2 – 3 – 4) g Wireless router...
  • Page 11 2� Power LED When you apply power to the router or restart it, a short period of time elapses while the router boots up� router is OFF solid Green router is ON and ready g Wireless router...
  • Page 12 GreeN means a 10/100Base-T device is connected� When information is being sent over the port, the leD blinks rapidly� No device is linked to the port Green 10/100Base-T device connected Blinking Green Port activity g Wireless router...
  • Page 13 Use The lights on the router will momentarily flash� The restore is complete in of a cable other than the cable supplied with the router may not work 60 seconds� properly� g Wireless router...

  • Page 14: Setup Assistant

    Setup Assistant Your cable or Dsl modem must be equipped with an rJ45 ethernet port� Belkin has provided our setup Assistant software to make installing your Many modems have both an rJ45 ethernet port and a UsB connection� router a simple and easy task� You can use it to get your router up and if you have a modem with both ethernet and UsB, and are using the UsB running in minutes�...

  • Page 15: Connecting And Configuring Your Router

    Connect the other end to your modem, in the port that’s now free� Plug in your modem’s power cord� Wait 60 seconds for the modem to start up� Plug the router’s power supply into the black port on the back� Plug the other end into the wall outlet� g Wireless router...

  • Page 16: Internet

    15 seconds� Click on “Go” to run the setup Assistant� Follow the instructions there� iMportant: run the setup Assistant from the computer that is directly connected to the router from step 1 – B� g Wireless router...
  • Page 17 Select Country Confirmation Screen select your country from the drop-down box� Click “Begin” to continue� Verify that you have completed all QiG steps by checking the box to the right of the arrow� Click “Next” to continue� g Wireless router...

  • Page 18: Setup Assistant

    Assistant will show you a progress screen each time a step in the The setup Assistant will now examine your computer’s network settings setup has been completed� and gather information needed to complete the router’s connection to the internet� g Wireless router...

  • Page 19: Setup Assistant

    (ssiD)� This is the name of your wireless network to which your computers or devices with wireless network adapters will connect� You can either use the default or change it to something unique� Write down this name for future reference� g Wireless router...

  • Page 20: Internet

    2�4 Requesting Internet Account Info (if needed) if your internet account requires a login and password, you will be select your isP from the drop-down boxes� prompted with a screen similar to the illustration below� Click “Next” to continue� g Wireless router...

  • Page 21: Setup Assistant

    We are almost done� The setup Assistant will now check your connection router and restarting it� Wait for the on-screen instructions� to the internet� note: Do not disconnect any cable or power off the router while the router is rebooting� Doing so will render your router inoperable� g Wireless router...

  • Page 22: Setup Assistant

    Congratulations Troubleshooting You have finished installing your new Belkin router� You will see the if the setup Assistant is not able to connect to the internet, you will see Congratulations screen when your router can connect to the internet� You the following screen�...

  • Page 23: Internet

    Once you have verified that your other wired and wireless computers are computers to your network� Follow the on-screen instructions� properly connected, your network is set up and working� You can now surf the internet� Click “Next” to return to the main menu� g Wireless router...

  • Page 24: Setup Assistant

    The security Assistant will guide you through the process� Click “security Assistant” and follow the on-screen instructions� iMportant: run the setup Assistant from the computer that is directly connected to the router from step 1�B� g Wireless router...
  • Page 25 Progress Screen 3�1 Picking the Security Type The security Assistant will show you a progress screen each time a step select the security type for your wireless network and click “Next” has been completed� to continue� g Wireless router...
  • Page 26 Click on “Transfer Key” if you have a UsB flash drive� Follow the on-screen instructions, or click on “Print” to print the information� Manually enter it to each wireless computer� Then, click “Next” to continue� g Wireless router...
  • Page 27 You now can run computer” and click “Next”� Then, follow the on-screen instructions� your network wirelessly and securely� Click “Finish” to take you back to the main menu� g Wireless router...

  • Page 28: Alternate Setup Method

    DMZ feature for a single computer on your network Change the router’s internal password • • enable/Disable UPnP (Universal Plug-and-Play) • reset the router • Back up your configuration settings • reset the router’s default settings • Update the router’s firmware g Wireless router...
  • Page 29 ON if your your connections� computer is connected properly� if it is not, recheck your connections� g Wireless router...
  • Page 30 Advanced User interface� in your browser, type “192�168�2�1” (you do not Advanced User interface, go to the section entitled “Manually Configuring need to type in anything else such as “http://” or “www”)� Then press the Network settings”� “enter” key� g Wireless router...
  • Page 31 “submit” button to log in� default login time-out is 10 minutes� This can be changed from 1 to 99 minutes� For more information, see the section in this manual entitled “Changing the login Time-Out setting”� g Wireless router...
  • Page 32 The home page is the first page you will see when you access the Web-Based Advanced User interface (Ui)� The home page shows you a quick view of the router’s status and settings� All advanced setup pages can be reached from this page� (10) g Wireless router...
  • Page 33 When the router is not connected to the internet, the indicator will read “no connection” in reD� The indicator is automatically updated when you make changes to the settings of the router� g Wireless router...
  • Page 34 Changes to any of these settings can be made by clicking on the links or by clicking on the “internet/WAN” “Quick Navigation” link on the left side of the screen� g Wireless router...
  • Page 35 MAC address or type in a specific WAN MAC address, if required by your isP� When you have finished making settings, the “internet status” indicator will read “Connected” if your router is set up properly� g Wireless router...
  • Page 36 Your host name is assigned by your isP� some dynamic connections may require that you clone the MAC address of the PC that was originally connected to the modem� g Wireless router...
  • Page 37 Provided by your isP� enter your iP address here� subnet Mask Provided by your isP� enter your subnet mask here� isp gateway address Provided by your isP� enter the isP gateway address here� g Wireless router...

  • Page 38: Alternate Setup Method

    Your isP gave you software such as WinPOeT or enternet300 that you use to connect to the internet; or You have to double-click on a desktop icon other than your browser to get on the internet� g Wireless router...
  • Page 39 Get Dynamically From isP: Getting WAN iP address from minutes of no internet activity� This option should be used if you pay for isP automatically� your internet service by the minute� Use static iP address: Need to enter isP information below fields (My iP Address)� g Wireless router...
  • Page 40 Type in the information provided by your isP in the space provided� When you have finished, click “Apply Changes”� After you apply the changes, the “internet status” indicator will read “Connected” if your router is set up properly� g Wireless router...
  • Page 41 This option should be used if you pay for Get Dynamically From isP: Getting WAN iP address from your internet service by the minute� isP automatically� Use static iP address: Need to enter isP information below fields (My iP Address)� g Wireless router...
  • Page 42 MEthoD sections table of contents Setting your Connection Type if you are a Telstra® BigPond/OptusNet Cable User Use this connection type for BigPond Cable and OptusNet Cable connections only� g Wireless router...
  • Page 43 Setting Custom Domain Name Server (DNS) Settings A “Domain Name server” is a server located on the internet that translates Universal resource locators (Urls) like “www�belkin�com” into iP addresses� Many internet service Providers (isPs) do not require you to enter this information into the router� The “Automatic from isP” box should be checked if your isP did not give you a specific DNs address�...
  • Page 44 MAC address will be “seen” by the isP and MAC address you specified� may cause the connection not to work� Belkin has provided the ability to clone (copy) the MAC address of the computer into the router� This MAC address, in turn, will be seen by the isP’s system as the original MAC...

  • Page 45: Changing Lan Settings

    A quick description of the functions can be found here� To view the settings or make changes to any of the lAN settings, click on “lAN settings”, or to view the list of connected computers, click on “DHCP Client list”� g Wireless router...
  • Page 46 There is no need to change the subnet mask� This is a unique, advanced want to change this number, you can do so by entering a new starting and feature of your Belkin router� it is possible to change the subnet mask ending iP address and clicking on “Apply Changes”� The DHCP server if necessary;...

  • Page 47: Viewing The Dhcp Client List Page

    Domain name The default setting is “Belkin”� You can set a local domain name (network name) for your network� There is no need to change this setting unless you have a specific advanced need to do so� You can name the network anything you want such as “MY NeTWOrK”�...

  • Page 48: Configuring The Wireless Network Settings

    Wireless router...
  • Page 49 802�11b and 802�11g clients in your network, we recommend setting the problem� please note that switching to b only mode will decrease router to g and b mode� This setting should only be changed if you have a 802.11g performance. specific reason to do so� g Wireless router...
  • Page 50 For instance, if another network is operating on channel 11, then set your network to channel 6 or below� To change the channel, select the channel from the drop-down list� Click “Apply Changes”� The change is immediate� g Wireless router...
  • Page 51 VoiP on your network, we recommend that you enable the Qos feature� g Wireless router...

  • Page 52: Securing Your Wi-Fi Network

    64-bit and 128-bit WeP encryption, but you might have older equipment keys) bits of system- encryption is throughput loss that only supports 64-bit WeP� All Belkin wireless products will support generated strengthened both 64-bit and 128-bit WeP� data g Wireless router...
  • Page 53 Temporal Key integrity Protocol (TKiP) and (Aes) for encryption� aF 0F 4b c3 D4 = 64-bit WeP key For a list of Belkin wireless products that support WPA, please visit our c3 03 0F aF 0F 4b b2 c3 D4 4b c3 D4 E7 = 128-bit WeP key website at www�belkin�com/networking�...
  • Page 54 Network key= WRONG Password G Wireless USB Network Adapter The Wireless G Desktop Card cannot access the network because it is using a different network key than the network key that is configured on the G Wireless router� g Wireless router...

  • Page 55: Wep Setup

    For instance: aF 0F 4b c3 D4 = 64-bit WeP key Warning: if you are configuring the G Wireless router or access point from a computer with a wireless client, you will need to ensure that security is turned ON for this wireless client� if this is not done, your client will lose its wireless connection�...
  • Page 56 03 0F aF 0F 4b b2 c3 D4 4b c3 D4 E7 = 128-bit WeP key reconnect to the router and set up the connection with the security key you’ve set up� g Wireless router...

  • Page 57: Using Wi-Fi Protected Setup

    WPs� enable WPs through the user interface shown below� enter the client’s PiN into the router’s internal registrar (accessed through this user interface)� The client will be automatically enrolled into your wireless network within two minutes� g Wireless router...

  • Page 58: Wpa Setup

    Windows XP operating system� You also need WPs handshaking procedure from the client within two minutes� to download the latest driver for your Belkin Wireless G Desktop or Notebook Network Card from the Belkin support site� Other operating router PiN: if an external registrar is available, you may enter in the systems are not supported at this time�...

  • Page 59: Guest Access

    Click “Apply Changes” to finish� You must now set all clients to match these settings depending on the type of access you want them to have� g Wireless router...
  • Page 60 NOT Manufactured by Belkin in order to use WPA-PsK, ensure you are using the Windows Wireless if you do NOT have a Belkin WPA Wireless Desktop or Wireless Notebook Network Utility by doing the following: Card and it is not equipped with WPA-enabled software, a file from Microsoft called “Windows XP support Patch for Wireless Protected...

  • Page 61: Using The Access Point Mode

    This can be from eight to 63 characters and can be letters, numbers, or symbols� This same key must be used on all of the clients that you set up� Click “OK” to apply settings� g Wireless router...
  • Page 62 The router is now acting as an access point� To access the router’s Web-Based Advanced User interface again, type the iP address you specified into your browser’s navigation bar� You can set the encryption settings, MAC address filtering, ssiD, and channel normally� g Wireless router...

  • Page 63: Configuring The Firewall

    UDP flooding • Ping of Death (PoD) • Tear Drop Attack • Denial of service (Dos) • iCMP defect iP with zero length • • riP defect • smurf Attack • Fragment flooding • TCP Null scan g Wireless router...
  • Page 64 (over the internet) cannot get to them because they cannot be “seen�” You will need to contact the application vendor to find out which port settings you need� g Wireless router...
  • Page 65 3� [9000]-[9000])� You can only pass one port per internal iP address� Opening ports in your firewall can pose a security risk� You can enable and disable settings very quickly� it is recommended that you disable the settings when you are not using a specific application� g Wireless router...

  • Page 66: Setting Mac Address Filtering

    MAC address of each client (computer) on your network to allow network be blocked from internet access at the times you specified� Note: Be access to each� sure you have selected the correct time zone under “Utilities> system settings> Time Zone”� g Wireless router...
  • Page 67 (WAN) iP� To put a computer in the DMZ, enter the last digits of its iP address in the iP field and select “enable”� Click “Apply Changes” for the change to take effect� g Wireless router...
  • Page 68 Click “Update Dynamic DNs” to update your iP address� if your iP address assigned by your isP changes, the router will automatically update DynDNs�org’s servers with your new iP address� You can also do this manually by clicking the “Update Dynamic DNs” button� g Wireless router...

  • Page 69: Utilities Tab

    The router can be set up so it will not respond to an iCMP ping from the outside� This heightens the level of security of your router� To turn off the ping response, select “Block iCMP Ping” and click “Apply Changes”� The router will not respond to an iCMP ping� g Wireless router...

  • Page 70: Restarting The Router

    NOT delete any of your configuration settings� restarting the router to restore normal operation Click the “restart router” button� The following message will appear� Click “OK”� g Wireless router...
  • Page 71 A 25-second countdown will appear on the screen� When the countdown reaches zero, the router will be restarted� The router’s home page should appear automatically� if not, type in the router’s address (default = 192�168�2�1) into the navigation bar of your browser� g Wireless router...
  • Page 72 (default = 192�168�2�1) into the navigation bar of your browser� The following message will appear� restoring the defaults includes restarting the router� it can take up to 25 seconds� it is important not to turn the power to the router off during the restart� g Wireless router...
  • Page 73 “File Download” will changed� it is recommended that you back up your current configuration open� Click “save”� before performing a firmware update� g Wireless router...
  • Page 74 “user�conf”� Be window� Click “Close”� sure to name the file so you can locate it yourself later� When you have selected the location and name of the file, click “save”� The configuration is now saved� g Wireless router...
  • Page 75 Click “Browse”� A window will open that allows you to select the location of the configuration file� All configuration files end with a “�conf”� locate the configuration file you want to restore and double- click on it� g Wireless router...
  • Page 76 Using the Web-based advanced User interface sections table of contents Please wait while the router loads the configuration file� The router’s home page should appear automatically� if not, type the router’s address (default = 192�168�2�1) into the navigation bar of your browser� g Wireless router...

  • Page 77: Updating The Firmware

    From time to time, Belkin may release new versions of the router’s firmware� Firmware updates contain feature improvements and fixes to problems that may exist� When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your router’s firmware to the latest version�...
  • Page 78 “Firmware Update” page, click “Browse”� A window will open Browse to the firmware file you downloaded� select the file by that allows you to select the location of the firmware update file� double-clicking on the file name� g Wireless router...
  • Page 79 The router’s home page should appear automatically� if not, type in the router’s address (default = 192�168�2�1) into the navigation bar of your browser� The firmware update is complete� You will be asked if you are sure you want to continue� Click “OK”� g Wireless router...
  • Page 80 You will have to log into the router again to make any more changes� The login time-out option is for security purposes and the default is set to 10 minutes� note: Only one computer can be logged into the router’s Web-Based Advanced User interface at one time� g Wireless router...
  • Page 81 UPnP (Universal Plug-and-Play) is yet another advanced feature offered (sNTP) server� This allows the router to synchronize the system clock by your Belkin router� it is a technology that offers seamless operation of to the global internet� The synchronized clock in the router is used to voice messaging, video messaging, games, and other applications that record the security log and control client filtering�...

  • Page 82: Information

    You will need to enter this information into the router� if not already selected, select “Obtain an iP address automatically” (1) and “Obtain DNs server address automatically” (3)� Click “OK”� your network adapter(s) are now configured for use with the router. g Wireless router...

  • Page 83: G Wireless Router

    Write in the iP address and subnet mask from the “iP Address” tab (3)� Click the “Gateway” tab (2)� Write the gateway address down in the chart� g Wireless router...

  • Page 84: G Wireless Router

    When the computer restarts, your network settings be set up for a static iP are now configured for use with the router� connection type� Write the address information in the table below� You will need to enter this information into the router� g Wireless router...

  • Page 85: G Wireless Router

    “Manually” or “Using DHCP”� if you do not, check the PPPoe tab (4) to make sure that “Connect using PPPoe” is NOT selected� if it is, you will need to configure your router for a PPPoe connection type using your user name and password� g Wireless router...

  • Page 86: G Wireless Router

    You will need to enter this information into the router� if not already selected, select “Using DHCP” next to “Configure:” (3), then click “Apply Now”� your network adapter(s) are now configured for use with the router. g Wireless router...

  • Page 87: G Wireless Router

    “Dial whenever a network connection is not present”, and “Always dial my default connection”� if you can make a selection, select “Never dial a connection”� if you cannot make a selection, go to the next step� g Wireless router...

  • Page 88: G Wireless Router

    “Preferences” window, click on “Advanced” then select “Proxies”� in the “Proxies” window, select “Direct connection to configuration script”, and “Use a proxy server”� Click “OK”� Then click “OK” again in the “internet Options” page� the internet”� g Wireless router...

  • Page 89: G Wireless Router

    2� Next, double-click on the CD-rOM drive that the setup Assistant screen does not appear software CD has been placed in to start the installation� within 15–20 seconds, open up your CD-rOM drive by double-clicking on the “My Computer” icon that is located on your desktop� g Wireless router...

  • Page 90: G Wireless Router

    CD, double-click on the icon labeled “setupAssistant�exe”� if the setup Assistant still does not start, reference the section titled “Manually Configuring Network settings” (page 86 of this User Manual) for an alternate setup method� g Wireless router...

  • Page 91: G Wireless Router

    Try shutting down and restarting your computer, then rerunning the firewall software for instructions on configuring the firewall to allow setup Assistant� internet access� if the setup Assistant is still unable to find the router, reference the section titled “Manually Configuring Network settings” for installation steps� g Wireless router...

  • Page 92: G Wireless Router

    This will cause the router to reattempt communication with the modem� if the “Modem” light on the router is not lit after completing these steps, please contact Belkin Technical support� Try shutting down and restarting your computer� g Wireless router...

  • Page 93: G Wireless Router

    You may need to configure your router to meet the specific requirements of your isP� To search our Knowledge Base for isP-specific issues, go to: http://web�belkin�com/support and type in “isP” if you are still unable to access the internet after verifying these settings, please contact Belkin Technical support�...

  • Page 94: G Wireless Router

    Your Belkin router’s lights should The exact window that opens will vary depending on the model of be as follows: wireless card you have;...

  • Page 95: G Wireless Router

    (as opposed to wirelessly), ensure that “Broadcast ssiD” is enabled� This setting is found on the router’s wireless “Channel and ssiD” configuration page� if you are still unable to access the internet after completing these steps, please contact Belkin Technical support� g Wireless router...

  • Page 96: G Wireless Router

    The default channel the router is shipped with is channel 11� You may choose from several other channels depending on your region (see the section titled “Changing the Wireless Channel” on page 48 for instructions on how to choose other channels)� g Wireless router...

  • Page 97: G Wireless Router

    How do i extend the range of my wireless network? Solution: Belkin recommends using one of the following products to extend wireless These Belkin products are available at your local retailer, or can be ordered from Belkin directly� network coverage throughout large homes or offices: For network/range extension information, please visit: www�belkin�com/...

  • Page 98: G Wireless Router

    Problem: i am having difficulty setting up Wired equivalent Privacy (WeP) security on a Belkin Wireless router or Belkin Access Point� solution: log into your Wireless router or Access Point� For example: Open your web browser and type in the iP address of the Wireless router c3 03 0F aF 4b b2 c3 D4 4b c3 D4 E7 E4 = 128-bit key or Access Point�...

  • Page 99: G Wireless Router

    Problem: i am having difficulty setting up Wired equivalent Privacy (WeP) security on a Belkin client card (Wireless Network Card or Adapter)� Solution: The client card must use the same key as the G Wireless router or ensure the box “The key is provided for me automatically”...

  • Page 100: G Wireless Router

    Problem: Do Belkin products support WPA? i am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless router or Belkin Access Point for a home network� Solution: Solution: note: To use WPA security, all your clients must be upgraded to drivers and software that support it�...

  • Page 101: G Wireless Router

    Problem: i am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin client card (Wireless Network Card or Adapter) for a home network� solution: Clients must use the same key that the G Wireless router or access Under “Network Authentication”, select “WPA-PsK”�...

  • Page 102: G Wireless Router

    Problem: i am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin client card (Wireless Network Card or Adapter) for a business� Solution: Double-click the “signal indicator” icon to bring up the “Wireless Under “Network Authentication”, select “WPA”�...

  • Page 103: G Wireless Router

    Problem: i am having difficulty setting up Wi-Fi Protected Access (WPA) security and i am NOT using a Belkin client card for a home network� solution: if you are NOT using a Belkin WPA Wireless Desktop or Wireless...

  • Page 104: G Wireless Router

    *Distance and connection speeds will vary depending on your networking environment� **This router is compatible with products based on the same version of the draft 802�11n specifications and may require a software upgrade for best results� g Wireless router...

  • Page 105: G Wireless Router

    FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin international, inc�, of 501 West Walnut street, Compton, CA reception, which can be determined by turning the equipment off and on, 90220, declare under our sole responsibility that the product:...

  • Page 106: G Wireless Router

    The FCC requires the user to be notified that any changes or radio products with the Ce 0682 or Ce alert marking comply with modifications to this device that are not expressly approved by Belkin the r&TTe Directive (1995/5/eC) issued by the Commission of the international, inc�, may void the user’s authority to operate the equipment�...

  • Page 107: G Wireless Router

    What is not covered by this warranty? Belkin international, inc� (“Belkin”) warrants to the original purchaser of All above warranties are null and void if the Belkin product is not provided this Belkin product that the product shall be free of defects in design, to Belkin for inspection upon Belkin’s request at the sole expense of...

  • Page 108: G Wireless Router

    Belkin reserves the right to review the damaged Belkin product� All costs how state law relates to the warranty. of shipping the Belkin product to Belkin for inspection shall be borne THis WArrANTY CONTAiNs THe sOle WArrANTY OF BelKiN�...

  • Page 109: G Wireless Router

    For information on product disposal please refer to Latviski Ar šo [Belkin Ltd Belkin Ltd ] deklar , ka [F5D7234-4 / iek rtas tips] atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist tajiem noteikumiem.

  • Page 110: G Wireless Router

    BelGiUM 07 07 00 073 www�belkin�com/fr/networking/ You can find additional support information on our website www�belkin� CZeCH rePUBliC 239 000 406 www�belkin�com/uk/networking/ com through the tech-support area� if you want to contact technical support by phone, please call the number you need from this list*�...
  • Page 111 Netherlands © 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Apple, AirPort, Mac, Mac OS, and AppleTalk are trademarks of Apple Inc., registered in the U.S. and other countries. Windows, Windows Vista, NT, and Microsoft are either...

This manual is also suitable for:

Pm01110ea-aF5d7234-4F5d7234-4a

Table of Contents