Kodak i1200 User Manual page 98

94
Ultrasonic Detection — check this option to set multi-feed detection.
• Sensitivity — controls how aggressively the scanner will work to
determine if more than one document is fed into the transport. Multi-
feeds are triggered by detecting air gaps between documents. This
allows multi-feed detection to be used with job sets containing
documents with mixed thicknesses.
- Low: the least aggressive setting and is less likely to detect labels,
poor quality, thick or wrinkled documents as multi-fed documents.
- Medium: use Medium sensitivity if your application has varying
document thickness or labels attached to the document. Depending
on the label material, most documents with labels should not be
detected as a multi-fed document.
- High: the most aggressive setting. This is a good setting to use if all
documents are similar in thickness no greater than 20-lb. bond
paper.
Action — select an option of how you want to the scanner to perform if
it detects a multi-fed document.
• Beep and continue: if selected, the scanner will beep, display and
log the condition but continue to operate.
• End of Job: if selected, the scanner log the condition and stop the
feeder and transport (the scanner will be disabled).
Alarm — select this option if you want the scanner to make a sound
when a multi-feed is detected. You can click the Speaker icon to
display the Open dialog box. From the Open dialog box, select the
desired .wav file and click OK.
Calibrate — the Kodak i1200/i1300 Scanners automatically calibrate.
This option is available if a Kodak representative directs you to calibrate
the scanner using this option.
A-61560 April 2008