The Diagnostics Window; Diagnostics - General Tab - Kodak i1200 User Manual

The Diagnostics
window

Diagnostics - General tab

A-61560 April 2008
From this window you can access the diagnostic functions of the
scanner. The Diagnostics window includes the following tabs: General,
Debug and Logs. The Diagnostics window can be accessed via the
Diagnostics button which is located on the General tab of the Device
Settings window.
Device — allows you to select which device to perform diagnostics on.
The options are: Document Feeder or Flatbed.
NOTE: This option is only available if you have the flatbed accessory
attached when the scanning application connected to the
scanner.
Done — returns you to the Device Settings window.
The General tab allows you to perform a scanner test and displays the
scanner time.
Tests
• Scanner — similar to, but more extensive than, a power-on self test.
Clicking this button will put the device through a series of checks to
determine that all the scanner hardware is working.
• Count only — check this box if you want to count the number of
documents entering the scanner transport without actually sending
the images to a scanning application.
Scanner Time
• Actual (GMT): displays the Greenwich Mean Time.
• Corresponding local time: displays the local time.
• Refresh icon : redisplays the current scanner time.
83