A-61560 April 2008
The main Kodak Scanner window will be displayed.
NOTE: When you access the main Kodak Scanner window, refer to
Chapter 4, Image Processing for more information on how to get
started using the TWAIN datasource or ISIS
4. Select the Default Setting Shortcut.
5. Click OK. This resets the software to the factory-installed default
settings. The factory default settings are set to capture black and
white images. For an i1210/i1310 Scanner one side of the
document will be scanned. For an i1220 or i1320 Scanner both
sides of the document will be scanned. The Scan Validation Tool
screen will be displayed.
6. Place some test documents into the input tray of the scanner.
driver.
25