View Memory ? (Command + 4 + 0); View Event Memory - Bosch D1260 User Manual

VIEW MEMORY ? (COMMAND + 4 + 0)

View Event Memory

Description
Your system stores events that occurred since the last time
display was cleared. Use COMMAND 40 to view Event
Memory.
Event Memory allows you or a service technician to review
events after they are cleared from the keypad's display.
*Alarm Silenced* will continue to scroll to remind you that
events are stored in Event Memory.
Each time you turn the system on, the Event Memory is
erased and the *Alarm Silenced* message is cleared.
Using View Memory
1. Ensure your keypad shows idle
disarmed text.
Bosch Security Systems | 9/04 | 4998122475D
Security System | User's Guide | Part II: System Commands - VIEW MEMORY ? (COMMAND + 4 + 0)
COMMAND
2. Press the
3. The display shows *System
Command*.
4
4. Press the key, followed by the
0
key.
If you prefer, you may use the Command Menu in
place of steps 2 and 3 to initiate this function.
Press the Menu> key to enter the Command
Menu, then press Next> repeatedly until you
reach the VIEW MEMORY ?> prompt.
5. Your system displays event summary lines and point text
in this order:
key.
+
43