Hardware: Configuration
Setting Date and Time
1
Press 'Menu' on the remote. (FIG. 12)
2
Use the arrow buttons to scroll down and select 'System'.
3
Scroll and select 'Initial'.
4
You will be prompted by a login screen. Enter the proper user and
password.
5
Use the arrow buttons to scroll down to each section that you need to
change.
6
Highlight the area to be changed and press OK button.
7
Change values with +/- keys and press OK again to accept.
The autotiming feature uses the GPS system to automatically
sync the system time. The 'Timing Time' is the time of day that
the system performs the sync each day.
For the autotiming feature to work properly, make sure to
properly set the time zone value. See Appendix A for a time
zone chart.
8
When everything is set for your location, choose the 'Save' button on
the screen and press the 'Enter' button on the remote.
40
DVR Configuration