Automatic Transmitter Setup - 10-8 Video Digital Evidence Solutions In-Car Video System Installation & User Manual

Automatic Transmitter Setup

1
Turn ON the transmitter.
2
Open the transmitter battery compartment to display the infrared (IR)
port. (See page 28)
3
Expose the transmitter IR port to the receiver. (FIG. 6)
4
Press and hold the Scan/IR button on the receiver until the red light
stops flashing on both the receiver and transmitter. (FIG. 6)
5
When the receiver's ready light glows, the system is ready for use.
6
Close the transmitter's battery compartment.
FIG. 6
Syncing the Transmitter and Receiver
UHF Wireless Mic Installation
27