G-Force Sensor; Gps System; Setting The Gps Speed Trigger - 10-8 Video Digital Evidence Solutions In-Car Video System Installation & User Manual

G-Force Sensor

The G-Force sensor is integrated into the DVR and configured at the
factory.

GPS System

The GPS Antennae can be mounted in or outside of the vehicle,
as long as it has a clear view of the sky.
The magnet backing is very strong for mounting on the roof. It can also be
mounted in the vehicle, under the windshield.
1
Mount the antennae.
2
Route the cable back to the DVR and attach to the port labeled GPS.
The GPS receiver will display your vehicle speed and coordinates at all
time on the system monitor. In addition, GPS coordinates are imbedded
in all recordings made on the system. During playback on a computer, the
user can elect to display a map show the actual location of the vehicle as the
video is played.
As long as the vehicle is in a location with a clear view of the sky
and GPS satellites, you will get a reading from the GPS receiver.

Setting the GPS Speed Trigger

Locate the GPS settings by pressing the Menu button on the remote then
selecting Alarm > Max Speed. The only option you will want to change is
the speed option. It is preset to 80 MPH.When the vehicle is travelling at
a rate greater than this setting, the DVR will begin to record and record as
long as the vehicle is over this speed setting.
37