Once the entire video system is installed, complete the following steps:
2.4 Ghz Wireless Mic DVR Set-up
1
Power on the system.
2
Press the 'Menu' key on the remote.
3
Use the arrow keys to select 'Alarm In'.
4
Go down to the 2.4 mic section, under Enable, ensure it is set to 'ON'.
5
Leave the rest of the setting as they are configured.
6
Scroll down to 'Save' and select to save the changes.
(Default Password: 111111)
7
Go to the 'Alarm Out' section.
8
Activate 'Output 2' - ensure it is set to 'High'.
9
Scroll down to 'Save' and select to save the changes.
10
Exit from the menu system by pressing the 'Return' key on the remote
until the menus disappear.
Black Wire (Audio Out)
1
Plug the male RCA plug into the female red RCA plug coming from
the Camera 1 Wire Harness. (FIG 3)
2.4GHZ Wireless Mic Installation
21