Hardware: Installation
UHF Transmitter
1
Power / Infrared (IR)
Color & State
Green, Flashing
Red, Pulsing on startup
Red, Pulsing after Sync.
On-Off Switch
2
Press and hold to turn on or off.
4-Pin Microphone Input Jack
3
Infrared (IR) Port
4
Receives infrared beam to synchronize frequencies. When using multiple systems,
only one transmitter IR port should be exposed at a time.
5
Built-in Wireless Mic
28
UHF Wireless Mic Installation
Green, Solid
Ready.
Controls locked.
Red, Solid
Battery power low. (Transmitter cannot be turned off until
batteries are changed)
Red, Flashing
IR transmission in process.
Batteries dead. (Transmitter cannot be turned on until batter-
ies are changed)
Transmitter and receiver are incompatible; contact 10-8
Video
FIG. 7
Meaning