Hardware: Configuration; Dvr Configuration; Entering Your Information - 10-8 Video Digital Evidence Solutions In-Car Video System Installation & User Manual

Hardware: Configuration

DVR Configuration

1
Insure the SD card(s) are properly inserted in the DVR unit. Slot 1
should be used first as it is the primary slot.
The additional slot is for extra storage. Each slot can accept a
card up to 32GB. This gives the system a total capacity of 64GB.
(2 x 32GB = 64GB)
2
Start the car or turn the key to the accessory position to power up the
system.
3
Wait a few moments and the system will come on and go through a
brief self test.
4
Align the camera for the proper view.
We recommend a slightly right of center view. This allows for a
centered view of a vehicle during a traffic stop if you use a left
offset during your stops.

Entering Your Information

1
Press 'Menu' on the remote. (FIG. 12)
2
Use the arrow button to scroll down and select 'System'. Press the
'Enter' button (the button between the arrows on the remote).
3
Select 'Initial' and press the 'Enter' button.
4
You will be prompted by a login screen. Enter the proper user and
password.
38