Table of Contents
Advertisement
Chapter 6. Introduction to the Basic Functions
6
.1 One-Touch Dialing
There are two ways for you to do one-touch dialing while in stand-by
mode:
You can long press
sent out directly.
You can use the first 9 record saved in the phone book by
pressing the location of the desired number. For instance, if the
storage location is 5, press 5 key to initiate the call. The name and
number will appear on the screen when sending out the call. For
details, please refer to Telephone Book.
6
.2 Make an International Call
Enter the outgoing national code, or press
second till "
Enter outgoing call's national code, area code and phone number.
Send out your call by pressing
omit the first zero of receiver's area code).
6
.3 Make an Emergency Call
Enter 112 (the international emergency number) and press
The call will be sent out. (This 112 number can be used in any country
despite if a SIM card is available, as long as you are included in a GSM
network).
6
.4 Make a Voicemail Call
Long press 0 and you will link to your voice mail center directly. For
details, please refer to page 23 – Messages: Voice Mail Box.
key. The last number you dialed will be
+
" shows up on the display.
key. (When dialing, please
12
key for about 1
key.
Advertisement
Table of Contents
