Chapter 2. Basic Call Functions
2
.1 One-Touch Dialing
There are two ways for you to do one-touch dialing while in stand-by mode:
♦
You can long press
sent out directly.
♦
You can use the first 9 record saved in the phone book by pressing the
location of the desired number. For instance, if the storage location is 5,
press 5 key to initiate the call. The name and number will appear on the
screen when sending out the call. For details, please refer to Phone Book
on page 17.
2
.2 Make an International Call
♦
Enter the outgoing national code, or press
+
until "
" shows up on the display.
♦
Enter the national code, area code and phone number of that call. Send
out your call by pressing
first zero of receiver's area code.
2
.3 Make an Emergency Call
Enter 112 (the international emergency number) and press
The call will be sent out. This 112 number can be used in any country despite if
a SIM card is available, as long as you are included in a GSM network.
2
.4 Make a Voice Mail Call
Long press 0 and you will link to your voice mail center directly. For details,
please refer to page 24.
(or
) key. The last number you dialed will be
(or
) key. When dialing, please omit the
11
key for about 1 second
(or
) key.