Technical Characteristics; Replacing The Battery - Compaq Evo D310 User Manual

Technical Characteristics

Replacing the Battery

To change the battery:
1 Disconnect the PC's power cord and remove the cover.
2 Remove the old battery by sliding it from under the retaining clip.
Retaining clip
3 Place the new battery in the battery holder ensuring it is correctly
seated with the clips in place.
4 Replace the PC's cover and connect the power cord.
5 Run the Setup program to reconfigure the PC.
The battery in this PC is a lithium battery which does not contain any heavy metals.
Nevertheless, in order to protect the environment, do not dispose of batteries in household
Note waste. Please return used batteries either to the shop from which you bought them, to the
dealer from whom you purchased your PC, or to HP so that they can either be recycled or
disposed of in the correct way. Returned batteries will be accepted free of charge.
Operating temperature and humidity ranges may vary depending on the mass storage devices
Note installed. High humidity levels can cause improper operation of disk drives. Low humidity ranges
can aggravate static electricity problems and cause excessive wear of the disk surface.
The power consumption and acoustics figures given in the tables below are valid for the
standard configuration as shipped. These figures will vary if some components are changed or
added to in the initial configuration. For more information, refer to the product's data sheet at
HP's web site:
When the computer is turned off with the power button on the front panel, the power
consumption falls below 5W, but it is not zero. The special on/off method used by these
computers considerably extends the lifetime of the power supply. To reach zero power
consumption in "off" mode, either unplug the power outlet or use a power block with a switch.
www.hp.com/go/library
Technical Characteristics
Battery holder
23