Model Descriptions; All Models; 3Cs2 Models; Fr2 Models - Hatco Sanitizing Sink Heaters Food Rethermalizers/Bain-Marie Heaters 3CS2 Installation & Operating Manual

Sanitizing sink heaters food rethermalizers/bain-marie heaters

Hide thumbs

Table Of Contents

Table of Contents

ALL MODELS

The Hydro-Heater mounts to the underside

of a holding vessel, leaving the entire vessel area free.

Units are shipped ready to install with all gaskets

and fittings. Hydro-Heaters include a stainless steel

front, powder coated body, a low-water cut-off system

and a convenient drain outlet.

3CS2 MODELS

The Hatco 3CS2 model heaters are designed for use

with any manual dishwashing operation. The 3CS2

heater maintains sanitizing rinse water of 180ºF (82ºC)

by using a special electronic temperature controller

and "free flow" technology, assuring a responsive

and efficient operation.

FR2 MODELS

The Hatco FR2 model heaters are designed

to be used with a Bain-Marie or Food Rethermalizer

to heat or hold foods at temperatures between

140ºF and 190ºF (60° - 88ºC). The desired holding

temperature is maintained by a special electronic

controller and "free flow" technology, assuring

a responsive and efficient operation.

PLUG CONFIGURATIONS

WARNING

Units equipped with a power cord and plug should

be plugged into an electrical outlet of the correct

voltage, size and plug configuration. If the plug

and receptacle do not match, contact a qualified

electrician to determine the proper voltage and size

and install the proper electrical outlet.