Table Of Contents; Important Owner Information; Introduction - Hatco Sanitizing Sink Heaters Food Rethermalizers/Bain-Marie Heaters 3CS2 Installation & Operating Manual

CONTENTS
Important Owner Information.....................................i
Introduction ...................................................................i
Important Safety Instructions .....................................1
Model Descriptions .......................................................3
All Models ..............................................................3
3CS2 Models...........................................................3
FR2 Models.............................................................3
Specifications.................................................................3
Plug Configurations ................................................3
Electrical Rating Chart - 3CS2 Models ..................4
Electrical Rating Chart - FR2 Models ....................5
Sizing Information ..................................................6
Dimensions..............................................................6
Electrical .................................................................6

IMPORTANT OWNER INFORMATION

Record the model number, serial number (identification
plate located on the lower right hand side, front corner
of the unit), voltage, and purchase date of your Hydro-
Heater in the spaces below. Please have this information
available when calling Hatco for service assistance.
Model No. ____________________________________
Serial No. ____________________________________
Voltage ______________________________________
Date of Purchase ______________________________

INTRODUCTION

Hatco 3CS2 Hydro-Heater Sanitizing Sink Heaters
and FR2 Hydro-Heater Food Rethermalizers/Bain-Marie
Heaters are designed to supply temperature-controlled
water to a holding vessel (sink or tank) located above
the heater. Water flows by natural convection from
the holding vessel directly into a tubular water chamber
with heating elements uniquely wrapped on the outside
of the flow tube. The heating elements do not come
in direct contact with the water reducing sediment
and lime buildup on the element, resulting in longer
life. The heated water flows upward and returns
to the holding vessel. A special electronic controller
maintains the setpoint temperature assuring a responsive
and efficient operation.
The unit electrical and plumbing connections
are factory-assembled and ready for installation.
This manual provides the installation, safety
and operating instructions for the Hydro-Heater
Form No. HHM-1103
Installation.....................................................................7
Plumbing .................................................................7
Operation.......................................................................9
Start-Up Procedures ................................................9
Minutes to Heat Table ...........................................11
Maintenance ................................................................12
General ..................................................................12
Draining & Cleaning All Models..........................12
Optional Power Flush Cleaning............................13
Deliming Instructions............................................14
Hatco Limited Warranty............................................16
Authorized Parts Distributors....................Back Cover
Business 8:00 a.m. to 5:00 p.m.
Hours: Central Standard Time
(Summer Hours: June to September -
8:00 a.m. to 5:00 p.m. C.D.T.
Monday through Thursday
8:00 a.m. to 2:30 p.m. C.D.T. Friday)
Telephone: (800) 558-0607; (414) 671-6350
Fax: (800) 690-2966 (Parts & Service)
(414) 671-3976 (International)
24 Hour 7 Day Parts & Service
Assistance available in the United
States and Canada by calling
(800) 558-0607.
Additional information can be found by visiting our
web site at www.hatcocorp.com
i