Ford Ecosport 2013 Owner's Manual page 86

Starting and Stopping the Engine
Switching the Ignition On
(Accessory Mode)
Press the button once without your foot
on the brake or clutch pedal. It is located
on the instrument panel near the steering
wheel. All electrical circuits and
accessories are operational and the
warning lamps and indicators illuminate.
Press the button again without your foot
on the brake or clutch pedal to turn your
vehicle off completely.
Starting Your Vehicle
Manual Transmission
1. Fully depress the clutch pedal.
2. Briefly press the button.
Note: Releasing the clutch pedal during
engine start will stop the engine cranking
and return to ignition on.
Automatic Transmission
1. Move the transmission selector lever
to park.
2. Fully depress the brake pedal.
3. Briefly press the button.
Note: Releasing the brake pedal during
engine start will stop the engine cranking
and return to ignition on.
Ecosport (CBW)
Diesel Engine
Note: Engine cranking will not commence
until the engine glow plug cycle has been
completed. This may take several seconds
in extremely cold conditions.
Failure to Start
The system does not function if:
• The passive key frequencies are
jammed.
• The passive key battery has no charge.
If you are unable to start your vehicle, do
the following.
1. Hold the passive key next to the
symbol on the steering column.
2. With the passive key in this position,
you can use the button to switch the
ignition on and start your vehicle.
Manual Transmission
If the engine does not crank when the
clutch pedal has been fully depressed and
the button is pressed:
1. Fully depress both the clutch and brake
pedals.
2. Press the button until the engine has
started.
Note: Releasing the clutch pedal during
engine start will stop the engine cranking
and return to ignition on. A message will be
shown in the display.
84