Ford Ecosport 2013 Owner's Manual page 167

3. Press and hold one of the preset
buttons. A progress bar and message
appear. When the progress bar
completes the station has been stored.
The audio unit briefly mutes as
confirmation.
You can repeat this on each waveband and
for each preset button.
Note: When you drive to another part of the
country, stations that broadcast on
alternative frequencies, and are stored on
preset buttons, may update with the correct
frequency and station name for that area.
Autostore Control
Note: This stores up to a maximum of the
10 strongest signals available, either from
the AM or the FM waveband, and overwrite
the previously stored stations. You can also
store stations manually in the same way as
other wavebands.
• Press MENU, select RADIO mode, then
press AUTOSTORE.
• When the search is complete, sound
returns and the strongest signals are
stored on the autostore presets.
Traffic Information Control
Many stations that broadcast on the FM
waveband have a TP code to signify that
they carry traffic program information.
Turning Traffic Announcements On and
Off
Before you can receive traffic
announcements, you must press either the
TA or TRAFFIC button. A TA display
appears to show the feature is on.
If you are listening to a station that
broadcasts traffic information, TP also
displays. Otherwise, the unit searches for
a traffic program.
Ecosport (CBW)
Audio System
When traffic information broadcasts, it
automatically interrupts normal radio or
CD playback and Traffic announcement
appears in the display.
If you select a non-traffic station using a
preset button, the audio unit remains on
that station unless you turn TA or TRAFFIC
off, then on again.
Note: If traffic announcement is on and you
select a preset or manually tune to a
non-traffic announcement station, you do
not hear traffic announcements.
Note: When you are listening to a
non-traffic announcement station and turn
traffic announcement off and on again, a
TP seek occurs.
Traffic Announcement Volume
Traffic announcements interrupt normal
broadcasts at a preset minimum level that
is usually louder than normal listening
volumes.
To adjust the preset volume:
• Use the volume control to make the
necessary adjustment during an
incoming traffic announcement
broadcast. The display shows the
selected level.
Ending Traffic Announcements
The audio unit returns to normal operation
at the end of each traffic announcement.
To end the announcement prematurely,
press TA or TRAFFIC during the
announcement.
Note: If you press TA or TRAFFIC at any
other time, it switches all announcements
off.
Automatic Volume Control
When available, automatic volume control
adjusts the volume level to compensate
for engine noise and road speed noise.
165