Capture Workflows
Capturing and Evaluating Test Images
Before your photo session begins, and a few times during a session, you should capture and evaluate
images to be sure that the lighting and camera setup are producing the desired results.
Image Attribute DCS 645 Tool
Exposure
Appearance of image on Image LCD
Histogram Display mode provides exposure
information about the overall image.
Luminometer
information about a specific area of the image. Shows
the level of luminance channel saturation of pixels
below the crosshairs on the Image LCD.
Focus
Zoom Display mode
Color
Click Balance
subsequently captured images
Scene content and
Appearance of image on Image LCD
Composition
Zoom Display mode
Contents
Back
(page 44)
(page 111)
provides exposure
(page 110)
(page 96)
neutralizes color shifts in
Next
Suggested Action
View images and interpret information from
the tool. Adjust camera settings (aperture,
shutter speed, ISO) and/or lighting. Recapture
image, if needed.
View the image at 1:1 and evaluate sharpness
and edge definition in high-contrast areas (for
example, eyes). Adjust lens focus and/or
check and adjust the depth of field.
Repeat, as necessary, when lighting
conditions change.
Look for details such as closed eyes, or
undesirable details. Recapture image, if
needed.
Index
21