Power Supply - Kodak 645 User Manual

The Basics

Power Supply

Use the included AC adapter when the DCS 645
is connected to a computer. Use the DCS 645
battery or AC adapter when the DCS 645 is not
connected to a computer.
Two AC adapters are included with your DCS
645:
8VDC AC adapter is used with the DCS 645
when you have a power outlet and do not
want to use a battery
12VDC AC adapter is used with the battery
charger
IMPORTANT:
If you remove power from the DCS 645
(disconnect the AC adapter or remove the
battery) you must wait 10 seconds before
reapplying power. If you don't the DCS 645 may
not boot.
Contents Back
DCS 645C: When you turn off the power on the
CONTAX 645 camera body, the DCS 645C
continues to use full power for approximately one
hour. To prevent this, remove the battery and/or
AC adapter from the DCS 645C.
Next
Index
You may occasionally use the DCS 645
unattached to a camera body, for example, to
transfer images to your computer. In this
case you must turn on the Image LCD or
establish an IEEE 1394 connection. If you
don't, the DCS 645 will go to sleep.
61