Table of Contents
Advertisement
Test Print Head
If you are not satisfied with the print quality, print a test page following the steps shown below.
1 1 1 1
Make sure that A4 sized paper is set in the tray.
2 2 2 2
Click the "Utility" tab in the printer driver setup
screen, and then click "Maintenance" button.
3 3 3 3
Click the "Start" button of "Test print head".
4 4 4 4
Click the "OK" button.
A test page will be printed.
Printer Driver Settings
How to Use the
Online Manual
Windows 95/98/Me/NT4.0 Windows 2000/XP
5 5 5 5
Check the result of the test page.
If the print quality is poor, go to the next step.
R
G
6 6 6 6
Click the "Start" button of "Auto head cleaning" to
clean the print heads.
If you cannot get a good result printing a test page even after
cleaning the print head 3 times, change the print head.
Reference:
7 7 7 7
Change the print head.
Replace the black print head if a white line(s) appears in the
"Black" results in the figure of step 5. If you find a white
line(s) in the "Colour" results in the same figure, replace the
colour print head.
Reference:
Print Status
Print
Window
B
C
M
Y
K
Colour
Black
Cleaning the Print Head
Changing the Print Head
Sharing Printer
Maintenance
Maintenance
Poor result
Fine result
56
Troubleshooting
Advertisement
Table of Contents
