Table of Contents
Advertisement
Test Print Head
If you are not satisfied with the print quality, print a test page following the steps shown below.
1 1 1 1
Make sure that Letter sized paper is set in the tray.
2 2 2 2
Click the "Advanced" tab in the properties dialog
box, and then click "Maintenance" button.
3 3 3 3
Click the "Start" button of "Test print head".
4 4 4 4
Click the "OK" button.
A test page will be printed.
How to Use the
Printer Properties
Online Manual
5 5 5 5
6 6 6 6
7 7 7 7
Print Status
Print
Window
Check the result of the test page.
If the print quality is poor, go to the next step.
Click the "Start" button of "Auto head cleaning" to
clean the print heads.
If you cannot get a good result printing a test page even after
cleaning the print head five times, change the print head.
Cleaning the Print Head
Reference:
Change the print head.
Replace the black print head if white lines appear in the black
portion of your test page. If you find white lines in portions
of colors except black, replace the color print head.
Changing the Print Head
Reference:
Sharing Printer
Maintenance
Maintenance
38
Troubleshooting
Advertisement
Table of Contents
