Table of Contents
Advertisement
Changing the Ink Tank (part 2)
3 3 3 3
Unpack the ink tank from its protective wrapping
and slowly remove the tape.
Example: Removing the tape of the yellow ink tank
! Be sure to install a new ink tank. Do not use an ink tank that
was once installed and then removed from the print head.
Using such ink tank prevents the system to show an
accurate amount of available ink on your computer. Besides,
print quality with such ink tank is not guaranteed.
! Hold the tank upright when removing the tape. Do not
touch the uncovered opening on the ink tank, as ink will
get on your hands.
! Ensure that there are no pieces of tape remaining on the
ink tank.
4 4 4 4
Turn the ink tank upside down.
Do not touch this area.
The printer may not print if it is dirty.
Printer Driver Settings
How to Use the
Online Manual
Windows 95/98/Me/NT4.0 Windows 2000/XP
5 5 5 5
Insert the ink tank to the print head of
corresponding number.
Match the ink tank number
1
to the print head number.
Hook the projection on the ink tank
2
here to fix it.
Make sure that the numbers on the ink tanks correspond to
the numbers on the print heads. If they do not correspond to
each other, print problems will occur.
Print Status
Print
Window
Make sure that each tab
3
securely locks the ink tank
by pressing here.
Example: Inserting the yellow ink tank
Sharing Printer
Maintenance
Maintenance
54
Troubleshooting
Advertisement
Table of Contents
