Sharp AJ-1100 Online Manual page 74

Nothing Prints (part 2)
Check your computer.
CHECK8 Is there enough computer memory or hard
disk space?
To use this printer, you must have an adequate amount
of hard disk space. If there is insufficient hard disk
space, delete unnecessary files to increase the free
space of the hard disk. If there is insufficient memory,
close unnecessary applications to increase memory
available for printing. If you are still unable to print,
install more memory into your computer.
CHECK9 Is your printer selected correctly in the
current application for the print job?
When choosing "Print" from the "File" menu located in
applications, be sure you have selected the "SHARP
AJ-1100" displayed in the "Print" dialog box.
If your operating system is Windows 2000/XP, make
sure that "SHARP AJ-1100" printer driver icon is
selected as the current printer.
Printer Driver Settings
How to Use the
Online Manual
Windows 95/98/Me/NT4.0 Windows 2000/XP
Check here.
CHECK10 Has the printer driver been installed
properly?
Check if the printer driver has been installed, following
the steps listed below.
1 1 1 1
Click the "Start" button, select "Settings" and then click
"Printers".
On Windows XP, click the "start" button, click "Control
Panel", click "Printers and Other Hardware", and then click
"Printers and Faxes".
2 2 2 2
Check if the "SHARP AJ-1100" printer driver icon is
shown.
If you still cannot print after confirming the "SHARP AJ-
1100" printer driver icon, the printer driver may not have
been installed correctly. In this case, you must uninstall the
printer driver and install the printer driver again.
Reference:
CHECK11 Is the parallel port (LPT) of your computer
set to "bidirectional" (when connected
through the parallel port)?
Check the current port setting, referring to the
operation manual of your computer. The unit does not
work normally when the setting is not bidirectional.
Print Status
Print
Window
Troubleshooting
Uninstalling the Printer Driver
Sharing Printer Maintenance
72
Troubleshooting